CMM6001-SC Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 60MHz TO 3.0GHz HIGH DYNAMIC RANGE AMPLIFIER

Advanced Product Information
April 2003
(1 of 4)
Features
❏ 60 MHz to 3.0 GHz Frequency Range
❏ 38 dBm Output IP3
❏ 2.5 dB Noise Figure
❏ 12.3 dB Gain
❏ 20.5 dBm P1dB
❏ SOT-89 SMT Package
❏ Single Power Supply
❏ +3V to +5V Voltage Rail
CMM6001-SC
60 MHz to 3.0 GHz
High Dynamic Range
Amplifier
Functional Block Diagram
Ground
4
1
2
3
Input Ground Output
Bias
Description
The CMM6001-SC is a high dynamic range amplifier
designed for applications operating within the 60 MHz to 3.0
GHz frequency range. It is an ideal solution for transmit and
receive functions where high linearity is required.
The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of low
NF and high IP3 at the same bias point make it an ideal trans-
mit or receive solution when used in applications including
cellular and PCS (personal communications service) operating
from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distrib-
ution systems) operating from 2.2 to 2.7 GHz; and WLAN
(wireless LAN) operating at 2.4 GHz.
The CMM6001-SC is packaged in a low-cost, space
efficient, surface mount SOT-89 package which provides
excellent electrical stability and low thermal resistance. All
devices are 100% RF and DC tested.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature
in a Celeritek test fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
Input Return Loss
Externally matched
Externally matched
0.60
3.0 GHz
10.5 12.5
dB
-10
dB
Output IP3
+33 +36
dBm
Noise Figure
Output P1dB
2.5 2.8
dB
20.5
dBm
Operating Current Range
55 75 100 mA
Supply Voltage
5.0
V
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Typical Parameters
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
900
12.5
-18.0
-17
+36
20.5
2.7
Typical
1900
11.5
-11.5
2400
10.8
-10.0
-16 -15
+36 +36
19.5 19.5
2.8 2.9
Units
MHz
dB
dB
dB
dBm
dBm
dB
Notes:
1. Typical values reflect performance in recommended application circuit.
Absolute Maximum Ratings
Parameter
Supply Voltage
RF Input Power
Rating
+6.0 V
+10 dBm
Parameter
Rating
Storage Temperature -55°C to +125°C
Junction Temperature 150°C
Operation of this device above any of these parameters may cause damage.
Parameter
Operating Temperature
Thermal Resistance
Rating
-40°C to +85°C
150°C/W
3236 Scott Boulevard
Santa Clara, California 95054
Phone: [phone]
Fax: [phone]