CH7007A Datasheet, PDF (1/49 Pages) List of Unclassifed Manufacturers – DIGITAL PC TO TV ENCODER WITH MACROVISION

CH7007A
CHRONTEL
Digital PC to TV Encoder with Macrovision^TM
Features
• Supports Macrovision^TM 7.X anti-copy protection
• Support for low voltage interface to VGA controller
• Universal digital interface accepts YCrCb (CCIR656)
or RGB (15, 16 or 24-bit multiplexed) video data in
both non-interlaced and interlaced formats
• TrueScale ^TM rendering engine supports underscan
operations for various graphic resolutions† ¥
• Enhanced text sharpness and adaptive flicker removal
with up to 5-lines of filtering†
• Enhanced dot crawl control and area reduction
• Fully programmable through I²C port
• Supports NTSC, NTSC-EIA (Japan), and PAL (B, D,
G, H, I, M and N) TV formats
• Provides Composite, S-Video and SCART outputs
• Auto-detection of TV presence
• Programmable power management
• 9-bit video DAC outputs
• Complete Windows and DOS driver software
• Offered in 44-pin PLCC, 44-pin TQFP
† Patent number 5,781,241
Â¥ Patent number 5,914,753
General Description
Chrontel’s CH7007 digital PC to TV encoder is a stand-
alone integrated circuit which provides a PC 99 compliant
solution for TV output. Suggested application use with the
Intel 810 chipset and Intel 810E chipset.* It provides a
universal digital input port to accept a pixel data stream
from a compatible VGA controller (or equivalent) and
converts this directly into NTSC or PAL TV format.
This circuit integrates a digital NTSC/PAL encoder with
9-bit DAC interface, and new adaptive flicker filter, and
high accuracy low-jitter phase locked loop to create
outstanding quality video. Through its TrueScale^TM
scaling and deflickering engine, the CH7007 supports full
vertical and horizontal underscan capability and operates
in 5 different resolutions including 640x480 and 800x600.
A new universal digital interface along with full
programmability make the CH7007 ideal for system-level
PC solutions. All features are software programmable
through a standard I²C port, to enable a complete PC
solution using a TV as the primary display.
LINE
MEMORY
D[11:0]
PIXEL DATA
DIGITAL
INPUT
INTERFACE
RGB-YUV
CONVERTER
TRUE SCALE
SCALING &
DEFLICKERING
ENGINE
YUV-RGB CONVERTER
NTSC/PAL
ENCODER
& FILTERS
TRIPLE
DAC
GPIO[1:0]
I²C REGISTER &
CONTROL BLOCK
SYSTEM CLOCK
PLL
TIMING & SYNC
GENERATOR
SC SD
RESET*
XCLK*
H
V XI/FIN XO CSYNC P-OUT DS/BCO
Figure 1: Functional Block Diagram
201-0000-002 Rev. 2.7, 08/23/2000 *Intel 810 and Intel 810E are Trademarks of Intel Corp
Y/R
C/G
CVBS/B
ISET
1