|
CC1010 Datasheet, PDF (1/133 Pages) Texas Instruments – Single Chip Very Low Power RF Transceiver with 8051-Compatible Microcontroller | |||
|
Chipcon
SmartRF â CC1010
CC1010
Single Chip Very Low Power RF Transceiver with
8051-Compatible Microcontroller
Applications
⢠Very low power UHF wireless data
transmitters and receivers
⢠315 / 433 / 868 and 915 MHz ISM/SRD
band systems
⢠Home automation and security
⢠AMR â Automatic Meter Reading
Product Description
The CC1010 is a true single-chip UHF
transceiver with an integrated high
performance 8051 microcontroller with 32
kB of Flash program memory. The RF
transceiver can be programmed for
operation in the 300 â 1000 MHz range,
and is designed for very low power
wireless applications.
The CC1010 together with a few external
passive components constitutes a
powerful embedded system with wireless
communication capabilities.
CC1010 is based on Chipconâs
SmartRFâ02 technology in 0.35 µm
CMOS.
Key Features
⢠300-1000 MHz RF Transceiver
⢠Very low current consumption
⢠High sensitivity (typically -107 dBm)
⢠Programmable output power up to
+10 dBm
⢠Data rate up to 76.8 kbit/s
⢠Very few external components
⢠Fast PLL settling allowing frequency
hopping protocols
⢠RSSI
⢠EN 300 220 and FCC CFR47 part
15 compliant
⢠RKE â Remote Keyless Entry with
acknowledgement
⢠Low power telemetry
⢠Toys
⢠8051-Compatible Microcontroller
⢠Typically 2.5 times the performance
of a standard 8051
⢠32 kB Flash, 2048 + 128 Byte SRAM
⢠3 channel 10 bit ADC, 4 timers / 2
PWMs, 2 UARTs, RTC, Watchdog,
SPI, DES encryption, 26 general I/O
pins
⢠In-circuit interactive debugging is
supported for the Keil µVision2 IDE
through a simple serial interface.
⢠2.7 - 3.6 V supply voltage
⢠64-lead TQFP
This document contains information on a preproduction product. Specifications and information herein are subject to
change without notice.
Chipcon AS
SmartRFâ CC1010 PRELIMINARY Datasheet (rev. 1.0) 2002-09-18
Page 1 of 133
|
▷ |