|
C9108-00 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Standard Dual Beam Wire Wrap Edge-Grip Sockets | |||
|
Series C81/C91 Standard Dual Beam
Wire Wrap Edge-Grip Sockets
FEATURES:
ÂDual beam, edge-grip contacts provide high retention with
positive wiping action.
ÂRemovable cover provides lower profile.
ÂSide-to-side stackable.
SPECIFICATIONS:
ÂBody is black UL 94V-0 Glass-filled Thermoplastic Polyester
(PBT).
ÂDual beam contact is Grade A Phosphor Bronze Alloy, 1/2
hard.
ÂContact plating is either 50-150m [1.27-3.81mm] min. Tin
per MIL-P-81728 or 10m [.25mm] min. Gold per MIL-G-
45204 over 50m [1.27mm] min. Nickel per QQ-N-290.
ÂContact current rating=1.5 Amp.
ÂContact resistance=20 mOhms initial.
ÂInsulation resistance=100 MOhms @ 500 VDC per
MIL-STD-1344, method 3003.1.
ÂDielectric withstanding voltage=1000 VAC.
ÂOperating temperature=221°F [105°C] Tin plating,
257°F [125°C] Gold plating.
ÂSolderability: MIL-STD-202, method 208 less heat aging.
ÂAccepts leads up to .011 x .018 ± .003 [.28 x .46 ± .08]
or .021 [.53] diameter.
ÂAccepts leads .100-.200 [2.54-5.08] long with cover.
MOUNTING CONSIDERATIONS:
ÂSuggested PCB hole size=.046± .002 [1.17 ± .05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
Note: Aries specializes in custom design and production. In addition to the stan-
dard products shown on this page, special materials, platings, sizes, and configura-
tions can be furnished, depending on quantities. Aries reserves the right to change
product specifications without notice.
ORDERING INFORMATION
CXXXX-XX
Socket series
Pin plating:
91=Gold
81=Tin
No. of pins
(see table)
C81 series:
-04=closed entry
-54=open entry
C91 series:
-00=closed entry
-50=open entry
All tolerances ± .005 [.13]
unless otherwise specified
CONTACT DETAIL
No. of Pins
8
14
16
18
20
22
24
28
36
40
Dim. ÂAÂ
.465 [11.81]
.765 [19.43]
.865 [21.97]
.965 [24.51]
1.065 [27.05]
1.180 [29.97]
1.280 [32.51]
1.480 [37.59]
1.880 [47.75]
2.080 [52.83]
Dim. ÂBÂ
.300 [7.62]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.700 [43.18]
1.900 [48.26]
Centers ÂCÂ
.300 [7.62]
.300 [7.62]
.300 [7.62]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.600 [15.24]
.600 [15.24]
.600 [15.24]
.600 [15.24]
Dim. ÂDÂ (max)
.400 [10.16]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.700 [17.78]
.700 [17.78]
.700 [17.78]
.700 [17.78]
Dim. ÂEÂ
---
.300 [7.62]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.500 [12.70]
.800 [20.32]
.800 [20.32]
http://www.arieselec.com  info@arieselec.com
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
UK/SCANDINAVIA/IRELAND
Milton Keynes, GB
TEL: +44 1908 260007
FAX: +44 1908 260008
EUROPE (MAINLAND)
Papendrecht, Holland
TEL: +31 78 615 94 65
FAX: +31 78 615 43 11
12003
REV.A
|