|
BCM5705M Datasheet, PDF (1/2 Pages) Broadcom Corporation. – 10/100/1000BASE-T CONTROLLER | |||
|
BCM5705M
®
10/100/1000BASE-T CONTROLLER WITH INTEGRATED TRANSCEIVER
FEATURES
SUMMARY OF BENEFITS
⢠Single-chip device for mobile LAN on Motherboard (LOM) or
Network Interface Card (NIC) applications
⢠Integrated 10/100/1000BASE-T transceiver
⢠10/100/1000BASE-T triple-speed MAC
⢠PCI v2.2, 32-bit/33-MHz host interface
⢠High-speed RISC core with 16-KB caches
⢠SMBus 2.0 controller
⢠On-chip power circuit controller and Wake on LAN power
switching circuit
⢠Advanced power management
⢠ACPI compliance
⢠Situation-sensitive features reduce power consumption
⢠Performance features
⢠TCP, IP, UDP checksum
⢠Microsoft® large send
⢠TCP segmentation
⢠CPU task offload
⢠Adaptive interrupts
⢠Robust manageability
⢠Wake on LAN
⢠Out-of-Box mode WOL
⢠PXE 2.0 remote boot
⢠Alert Specification ForumâASF 1.0 support
⢠Statistic gathering (SNMP MIB II, Ethernet-like MIB, Ethernet
MIB (802.3x, clause 30))
⢠Comprehensive diagnostic and configuration software suite
⢠ACPI 1.1a complaintâmultiple power modes
⢠Advanced network features
⢠Virtual LANsâ802.1q VLAN tagging; supports 64 VLANs
⢠802.3x flow control
⢠Advanced network features
⢠Cable analyzer features detect cabling problems
⢠3.3V I/Os (5V tolerant)
⢠JTAG
⢠Industryâs smallest 10/100/1000 MAC+PHY solution
⢠Optimized for LOM and NIC applications
⢠Enables small form factor PCs
⢠Ultra-low power and intelligent power management to
dramatically extend battery life
⢠0.13-mm CMOS design allows industryâs lowest power
⢠Advanced situation-sensitive power management features
⢠Power is continually reduced to the minimum needed
⢠Adapts to usage model
⢠Maximizes battery life and enables smaller mobile PCs
⢠Enables desktop PC products for all segments
⢠Pin-compatible with 5705FE, a 10/100 companion chip
⢠Allows one board layout for both gigabit and Fast Ethernet
applications
⢠Completely backward compatible
⢠With existing 10/100 network infrastructure
⢠With existing PCI-based desktop and mobile platforms
⢠Futureproof with flexible firmware architecture
⢠Flexible firmware adapts to changing standards
⢠Wirespeed custom packet filtering via on-board CPUs
⢠Power optimized through reduced CPU utilization
⢠Adaptive interrupts minimize the calls to PCâs CPU
⢠TCP/IP offloads reduce CPU burden significantly
⢠Reduces power consumption of PC processor
⢠Allows use of lower power/performance PC processor
⢠Cable analyzer tests for network cable issues
⢠Customers can field-test using self-diagnostics
⢠Reduce customer calls and returns, reducing costs dramatically
⢠Robust and highly manageable
⢠PXE 2.0, ACPI 1.1, WOL
⢠Integrated cable testingâlink quality, length, pair skew,
pair polarity, pair swap
⢠Flexible ASF 1.0
⢠Space savings for LOM
⢠196-pin HBGA package
⢠No external memory
⢠Integrated power circuitry reduces BOM costs
|
▷ |