English
Language : 

B-166 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – MIRROR WITH STAINLESS STEEL CHANNEL FRAME AND SHELF
-IRROR
MIRROR WITH
STAINLESS STEEL
CHANNEL FRAME
AND SHELF
gg
MM
SNAP LOCKING DESIGN
(Rear View)
 gg
MM 3
B-166
SERIES
SCREW LOCKING DESIGN
(Rear View)
 gg
MM
3
gg
MM
gg
MM
&RAME
g¿ÊOR4YP
ORMM
3
3
 gg
MM
Figure: 1
-ˆ`iÊ6ˆiÜ
>VŽÊ*>ÌiÉ7>Ê>˜}iÀ
 gg
MM
3

MM
4
3
Figure: 2
,OCKING3CREW
0HILLIPS (EAD
STANDARD B-166 SERIES MIRRORS
MODEL
NO.
B-166 1824
B-166 1830
B-166 1836
B-166 2436
OVERALL SIZE
W
H
18'' (46cm) 24'' (61cm)
18'' (46cm) 30'' (76cm)
18'' (46cm) 36'' (91cm)
24'' (61cm) 36'' (91cm)
ALL OTHER SIZE MIRRORS
Designer’s Notes:
1. Special-order sizes available on request.
2. Maximum size mirror available, 24'' x 60'' (61 x 152cm); minimum size, 12" x 12" (30 x 30cm). Maximum shelf length is 24" (61cm).
3. All Bobrick framed mirror/shelf models are manufactured to overall width and height dimensions including shelf. EXAMPLE: A 24'' x 36'' (61 x 91cm) mirror
will be furnished 24'' x 36'' (61 x 91cm) outside-of-frame to outside-of-frame including shelf.
4. To specify special sizes use Series Number followed by width then height in inches. EXAMPLE: B-166 2024.
5. Bobrick framed mirror/shelf models are manufactured to a tolerance ± 1/8'' (3.2mm).
6. For sufficient space to lift mirror onto wall hanger(s), provide 3-1/4'' (85mm) minimum clearance above center line of mounting screw holes.
7. Provide 1'' (25mm) minimum clearance at bottom of mirror for engaging locking screws and 1'' (25mm) clearance on each side.
MATERIALS:
Frame — Type 430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel 1/4" (6mm) return at rear with bright
polished finish. One-piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging
brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from
the wall. Locking devices secure mirror to concealed wall hanger. In Screw Locking Design(see figure 2), concealed Phillips-
head locking screws securely fasten mirror to wall hanger.
Shelf — 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin finish. 3/8" (10mm) return edges on front and sides
with front edge hemmed for additional safety. Shelf is welded to mirror frame and reinforced by concealed 16-gauge (1.6mm)
stainless steel brackets. No exposed rivet-heads, screws, or fasteners of any type appear on frame or shelf.
Mirror — No. 1 quality, 1/4" (6mm) select float glass: selected for silvering, electrolytically copper-plated by the galvanic
process, and guaranteed for 10 years against silver spoilage. Corners are protected by friction-absorbing filler strips; back is
protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.
Concealed Wall Hanger — 20-gauge (9.0mm) galvanized steel. Incorporates lower support member, forming rigid rect-
angle, which engages lower backplate louvers to keep bottom of mirror against wall.
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
Rev. 4506 R/B
Printed in U.S.A.
© 2006 by Bobrick Washroom Equipment, Inc.