AZ983 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 80 AMP AUTOMOTIVE RELAY

AZ983
80 AMP
AUTOMOTIVE
RELAY
FEATURES
• 80 Amp contact rating
• High momentary carry current
• High operating temperature (85°C)
• SPST N.O. (1 Form A), SPDT (1 Form C),
SPST N.C. (1 Form B)
• PCB terminals
• Epoxy sealed version available
CONTACTS
Arrangement
SPST (N.O.) (1 Form A)
SPDT (1 Form C), SPST (N.C.) (1 Form B)
Ratings
Resistive load:
Max. switched power:
1120 W (SPST) Form A
840 W (N.O.) Form C
840 W (N.C.) Form C,
Form B
Max. switched current: 80 A (SPST) Form A
60 A (N.O.) Form C
60 A (N.C.) Form C,
Form B
Max. switched voltage: 30 VDC
Material
Silver tin oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
0.76 W
3.0 W at 20°C (68°F)
68°C (122°F) at nominal coil voltage
Max.155°C (311°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 80 A 14 VDC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms contact to contact
Insulation Resistance 100 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10-55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Copper alloy
PCB
Weight
40 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2003-06-24