AZ951 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – SUBMINIATURE POWER RELAY

AZ951/AZ952
SUBMINIATURE
POWER RELAY
FEATURES
• Subminiature size for high density packaging
• Coil sensitivity to 116 mW
• Extremely low cost
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
• 1 Amp, 3 Amp & 5 Amp contacts
• Life expectancy to 10 million operations
• UL, CUR file E43203
CONTACTS
Arrangement SPDT (1 Form C)
Ratings
Light Duty
Medium Duty
Heavy Duty
Material
Resistive load:
Max. switched power: 30 W or 125 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 1 A at 30 VDC
1 A at 125 VAC
Max. switched power: 90 W or 375 VA
Max. switched current: 3 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 3 A at 30 VDC
3 A at 125 VAC
Max. switched power: 150 W or 625 VA
Max. switched current: 5 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 5 A at 30 VDC
5 A at 125 VAC
270 VA, 120 VAC Pilot Duty
N.O. 30k cycles, N.C. 6k cycles
Light and Medium Duty: Silver, gold plated
Heavy Duty: Silver nickel gold plated
Resistance
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Max. Temperature
Standard Coil: 253 mW
Sensitive coil: 116 mW
0.8 W at 20°C (68°F) ambient
0.6 W at 40°C (104°F) ambient
At nominal coil voltage:
Standard: 54°C (97°F)
Sensitive: 30°C (54°F)
105°C (221°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 3 A 120 VAC Res.
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppressions)
Dielectric Strength
1250 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
Standard: -25°C (-13°F) to 55°C (131°F)
Sensitive: -25°C (-13°F) to 75°C (167°F)
Both: -25°C (-13°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55Hz
Shock
15 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
3.5 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
5/25/05W