AZ941 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – MINIATURE PC BOARD RELAY

AZ941
MINIATURE
PC BOARD RELAY
FEATURES
• Contacts rated at 3, 5, 10 or 16 Amps
• DC coils to 48 V
• Extremely low cost
• Life expectancy to 10 million operations
• Epoxy sealed
• UL, CUR file E44211; VDE 10056
• Class F available
5
GENERAL DATA
CONTACTS
Arrangement
SPDT (1 Form C)
Form A available upon request
Ratings
Light Duty
Medium Duty
Heavy Duty
Extra Heavy
Duty
Resistive load
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating: 3 A at 30 VDC or 250 VAC
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating: 5 A at 30 VDC or 125 VAC
1_{/10 HP @ 125 VAC}
Max. switched power: 300 W or 2500 VA
Max. switched current: 12 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating: 5 A at 30 VDC
12 A at 125 VAC
1_{/4 HP @ 125 VAC}
1_{/2 HP @ 250 VAC}
Max. switched power: 300 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating: 16 A at 125 VAC
10 A at 30 VDC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material
Silver cadmium oxide
Resistance
< 100 milliohms initially
COIL
Life Expectancy
Mechanical
Electrical
Minimum operations
1x10⁷
1 x 10⁵ at 12 A 120 VAC Res.
Operate Time (typical) 6 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to coil
(at sea level for 1 min.) 750 Vrms contact to contact
Meets FCC part 68.302 1500 V lightning
surge
Meets FCC part 68.304 1000 V dielectric
Insulation Resistance 100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
Vibration
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
0.062" (1.5 mm) DA at 10–55Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
13 grams
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Temperature
230 mW
1.1 W 20°C (68°F) ambient
.86 W 40°C (104°F) ambient
27°C (49°F) nominal coil voltage
Max. 105°C (221°F)
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
5 Only AZ941-1CT unsealed version is VDE approved at 5A,
250 VAC.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2003-04-08