AZ2280 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 30 AMP MINIATURE POWER RELAY

AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
• Quick-connect leads for contacts and coil
• 1 Form A, B and C contacts available
• AC and DC coils available
• Available with epoxy seal
• UL and Canadian file E44211
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at rated load
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Ratings
UL, CUR
Minimum
Load
Material
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current:30 A (Form A N.O.)
15 A (Form B N.O.)
20 A (Form C N.O.)
15 A (Form C N.O.
Max. switched voltage: 277 VAC, 30 VDC
30/15 A @ 240 VAC, gen use (NO/NC, Form A or B)
20/10 A @ 240 VAC, gen use (NO/NC, Form C)
20/10 A @ 28 VDC, res (NO/NC, Form A or B)
1.0/.25 Hp @ 120 VAC, (NO/NC, Form A or B)
2.0/.50 Hp @ 240 VAC, (NO/NC, Form A, B or C)
5/3 A @ 240 VAC, tungsten (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, gen use (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, ballast (NO/NC, Form A, B or C)
5 VDC, 0.1 A
Silver alloy
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
Operate Time
15 ms at nominal coil voltage
Release Time
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-55°C (-67°F) to 85°C (185°F)
Storage
-55°C (-67°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick Connects
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 500 mW
AC: 1.4 VA
DC: 1.7 W at 20°C (68°F)
AC: 2.7 VA at 20°C (68°F)
38°C (68°F)
Max. 105°C (221°F)
Max. Immersion Time 30 seconds
Weight
36 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]
Telephone [phone] Fax [phone]
1999-03-11