AWM620RX-INV Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 2.4GHz Video/Audio RF Module

AWM620RX-INV
2.4GHz Video/Audio RF Module
General:
TECHNICAL SPECIFICATION
22-Oct-04 P1/4
Operation Frequency Range
Channel Selection
Video-Audio Modulation/Demodulation Type
Supply Voltage
Supply Current
2400 ~ 2483MHz
PLL Synthesizer, 4ch. ⁽¹⁾
FM-FM
DC + 5V
152mA ~ 163mA @-70dBm RF in
Receiver:
Input Signal Level Range
Adjacent Channel Power Rejection
Video
Output Impedance
Output Signal Level
Frequency Response
Differential Gain
Differential Phase
S/N Ratio (100KHz, 1V_P-P Sine Wave)
Video Polarity (Referred to pin12)
Audio
Output Impedance
Output Frequency Range
Output Signal Level (Modulation Signal :
50Hz~15KHz Sine Wave)
Harmonic Distortion (THD)
(50Hz~15KHz, 0.5V_P-PSine Wave )
S/N Ratio (50Hz ~ 15KHz)
Subcarrier Frequency
Subcarrier Frequency Accuracy
RSSI
RSSI Output Voltage(RF Input -45~-85dBm)
-85~-10dBm
-20dBm, typ. (±3dB)
75Ω, typ.
1V _P-P, typ. (±0.2Volt)
± 5 dB, max. 50Hz~5.5MHz
± 5%, max.
± 5 Deg., max.
45dB, min.
Internal Pull-High: Positive
Pull-Low: Negative
600Ω, typ.
50Hz ~ 20KHz
3V_P-P, typ. (±0.2Volt)
1.5%, max.
50dB, typ. (±3dB)
6MHz, 6.5MHz
± 50KHz
1.5 ~ 3.3V
AIRWAVE TECHNOLOGIES INC.
3F, No.9 Industry E. 9^th RD., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C. TEL : [phone] Fax [phone]
Copyright  2000 by Airwave Technologies Inc.
All Specification are subject to change without notice.