AS535 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 2.5 V Precision Reference / Amplifier

Features
• ^{Temperature-compensated:}
50 ppm/°C
• ^{Trimmed 0.5% typical bandgap}
reference
• ^{High gain Internal amplifier with}
100 mA capability
• ^{Nominal temperature range}
extended to 105° C
• ^{Low frequency dynamic output}
impedance: < 150 mΩ
• ^{Low output noise}
Pin Configuration — Top view
SOIC (D)
A/AS535
2.5 V Precision Reference / Amplifier
Description
The AS535 is a three terminal adjustable shunt regulator
utilizing an accurate 2.5V bandgap reference. The AS535 is
functionally similar to an AS2431 except that the reference
and amplifier operate off of a seperate supply from the
output, allowing very low output voltges (0.1V Typically)
Because of its robust bipolar technology, the AS535 handles
a wide range of current, and holds off up to 18V so its use
is not limited to low power, low voltage systems. Significant
care has been taken to provide adequate AC bandwidth to
allow the AS535 as an amplifier in control systems and
power electronics. ASTEC also offers a 1.0% version of this
part, the A535.
4L SIP (SIP)
SOT-23-5 (DBV)
VCC
N/C
N/C
ANODE
VOUT
N/C
N/C
VREF
VREF ^ANODE
VOUT
VCC
N/C
ANODE
VCC
VREF
VOUT
Ordering Information
Description
8-Pin Plastic SOIC
4-Pin Plastic SIP
SOT - 23 - 5
Temperature Range
0 to 105° C
0 to 105° C
0 to 105° C
0.5% Order Codes 1.0%
AS535D
A535D
AS535SIP
A535SIP
AS535DBV
A535DBV
© ASTEC Semiconductor
25