AS350 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – HOL-SEALERS Hole Seals

SCPFpXHe((7c7-660330))144822222--22620110
Accessories
Hole Seals
Hole Seals
HOL-SEALERS® Hole Seals
Hole Seals
Accessories: Hole Seals
Industry Standards
Steel Hole Seals
UL 508A Component Recognized; Type 3R, 4, 12, 13; File No.
E61997
CSA File No. 42186; Type 3R, 4, 12, 13
NEMA/EEMAC Type 3R, 4, 12, 13
IEC 60529, IP66
Stainless Steel Hole Seals
UL 508A Component Recognized; Type 3R, 4, 4X, 12, 13; File No.
E61997
CSA File No. 42186; Type 3R, 4, 4X, 12, 13
NEMA/EEMAC Type 3R, 4, 4X, 12, 13
IEC 60529, IP66
Application
Seal extra pushbutton holes, conduit openings and knockout
openings against dust, dirt, oil and water with Hoffman HOL-
SEALERS®. Seals will cover any size or shape of hole from .19-in.
diameter to maximum diameter shown in table. Can be used on
enclosure walls up to .31-in. (8-mm) thick.
Features
•• Available in multiple colors and sizes
•• Oil-resistant gasket provided
Specifications
Steel Models
•• 16 gauge galvanized steel backplate
•• Plated stud (10-32x5/8) and wing nut
Stainless Steel Models
•• 16 gauge stainless steel backplate
•• Seal, backplate, stud (10-24x5/8) and wing nut are 300 series
stainless steel
Finish
Steel seals have polyester powder paint finish over galvanized front
surface.
Stainless steel seals have polished front surface.
Bulletin: A80HS
Subject to change without notice
PH [phone] • FX [phone] • hoffmanonline.com
© 2010 Pentair Technical Products
1
Spec-00182 C