APC308 Datasheet, PDF (1/15 Pages) List of Unclassifed Manufacturers – Rail to Rail Output CMOS Operating Amplifier

APC308
Rail to Rail Output CMOS Operating Amplifier
Features
Applications
• Operating Voltage
Single Supply
• Amplifiers
3V to 6V • Filters
• Low Input current
2pA • Analog circuit
• Rail to Rail Output Swing
• Push-Pull Output Driving
• High Output Current Drive
Gereral Description
310mA
• Bandwidth:7MHz
The APC308 consists of two independent, high gain,
• Wide Temperature Range
CMOS operating amplifier, combining rail to rail out-
put range with large output current. It provides a low
• Available in 8 pin SOP ,DIP , TSSOP or MSOP ^{input bias current 2pA.}
Package
The output swing of the amplifier, guaranteed for
loads down to 1kΩ and output current to an 10Ω load
from a 5V power supply. APC308 designed to oper-
ating at 3V is especially well-suited for low voltage
application.
Ordering Information
)2+!&
Handling Code
Temp. Range
Package Code
Block Diagram
Package Code
J : PDIP - 8
O : TSSOP - 8
Temp. Range
I : - 40 to 85 ° C
Handling Code
TU : Tube
K : SOP - 8
X : MSOP-8
TR : Tape & Reel
Out 1 
Inverting Input 1
Non-inverting Input 1 !
V-- "
-+ +-
APC308
& V_,,
% Out 2
$ Inverting Input 2
# Non-inverting Input 2
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
1
Rev. A.1 - Oct., 2001
www.anpec.com.tw