AP2D000SZBE Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Industrial Pushbutton Switch

NEW!
AP Series
Industrial Pushbutton Switch
Features/Benefits
• IP67 sealed
Typical Applications
• Harsh environments
A
• 1,000,000 life cycle
• Off-Road
• Illumination / non-illumination
• Industrial
• Multiple colored caps
• Medical
• Threaded or snap-in mounting • Transportation
• SPST, normally open
• Joystick control modules
• Caps available separately
• Gaming
• RoHS compliant
• Military
Specifications
FUNCTION: SPST Momentary, double break
CONTACT ARRANGEMENT: N.O.
MOUNTING TYPE:
Snap-in (panel front) or threaded (nut with locking washer and
panel gasket)
Mechanical
TOTAL TRAVEL: 2.1 ± 0.2 mm
OPERATING POINT 1.55 ± 0.25 mm
OVER TRAVEL: 0.6 ± 0.2 mm
OPERATING FORCE: 4N ± 0.5N standard configuration; other
force option 2N ± 0.5N
VIBRATION: 10-500 Hz 10g Max
SHOCK: 60g 11ms sawtooth wave
Electrical
CONTACT RATING:
200mA @ 24 V DC resistive
100mA @ 50 V DC resistive
400mA @ 32 V AC resistive
125mA @ 125 V AC resistive
DIELECTRIC STRENGTH: 1000 V AC min.
INSULATION RESISTANCE: 1 G Ω @ 500 VDC
INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads)
BOUNCE TIME: <5 ms
Materials
HOUSING: PBT
BASE: PBT
CAP: PBT
ACTUATOR:
Illuminated: Clear polycarbonate
Non-illuminated: PBT
INTERNAL SEAL: Silicone rubber
TERMINALS: Copper alloy, gold over silver plating
MOVABLE CONTACT: Copper alloy, gold over silver plating
TERMINAL SEAL: Epoxy
Operating Environment
OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated)
OPERATING LIFE: 1,000,000 cycles
Process Environment
SEALING: IP67
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
AP
Designation
AP AP Series
Operating Force
2
2 Newtons
4
4 Newtons
Actuator Style
D
Dome / Convex
C
Concave
E
Extended Dome
N
None
Please contact Customer
Service for additional colors
and paint / laser etched
button options.
Actuator Color
0
No Cap
2
Black
3
Red
4
Orange
5
Yellow
6
Green
Illumination
00 No LED*
01 Super White
02 Bi-color; Red (Green)
03 Red
05 Amber
06 Green
07 Super Blue
08 Bi-color; Amber (Green)
* No LED available in short body only
A–3
B
E
Terminal Seal
E
Epoxy
All models are epoxy sealed
Contact Material
B
Gold
Termination
Z
Solder Lug
W 12” Wire Leads 22 AWG
C**** PC Terminals
Bushing Style**
S
Snap-in plastic
T*** Threaded plastic
** Metal threaded bushing available, contact
Customer Service
*** T bushing style includes: 1 lockwasher, 1 hex nut & 1
panel seal washer
**** Illumination not available with PC Terminals
Contact Customer Service for additional hardware options.
Specifications and dimensions subject to change
www.ck-components.com