AO241 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 1.0-2.0 Amp 120/240 Vac AC Output MINI-SIP

Series AO, ASO
1.0-2.0 Amp • 120/240 Vac • AC Output MINI-SIP
• Compact for High
Density PCB M ount
• DC Control, AC Output
• Triac (AO) or
SCR (ASO) Output
• Crydom’s Patented Design
• UL, CSA Approved
AO models offer Triac output, ASO
models are SCR output. The AO241(R)
are rated up to 1.0A, the ASO241(R) up
to 1.5A SPST-NO, and the ASO242(R)
up to 2.0A. ASO models are designed
for switching highly inductive, low cur-
rent loads such as solenoids. Available in
either zero voltage or random switching
(R) versions.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.
CURRENT DERATING CURVES
AO241(R)
1.0
0.8
0.6
0.4
0.2
0
20
40
60
80
AMBIENT TEMPERATURE (ºC)
AO Max. Load Current vs. Temp.
M O D E L N O . AO241 AO241R ASO241 ASO241R ASO242 ASO242R
INPUT SPECIFICATIONS ➀
Control Voltage Range
4-10 Vdc
4-10 Vdc
4-10 Vdc
Nominal Input Impedance
300 Ohm
300 Ohm
300 Ohm
Typical Input Current @ 5 Vdc
15 mAdc
15 mAdc
15 mAdc
Must Turn On Voltage
4.0 Vdc
4.0 Vdc
4.0 Vdc
Must Turn Off Voltage
OUTPUT SPECIFICATIONS ➀
Operating Voltage Range (47-63 Hz)
1.0 Vdc
24-280 Vrms
1.0 Vdc
12-280 Vrms
1.0 Vdc
12-280 Vrms
Load Current Range
.025-1.0 Arms .025-1.5 Arms
.06-2.0 Arms
ASO242(R)
2.0
ASO241(R)
1.5
Transient Over-Voltage
600 Vpk
Max. Surge Current, (16.6ms)
40 Apk
Min. Off-State dv/dt @ Max. Rated Voltage ➂ 500 V/µsec
600 Vpk
40 Apk
500 V/µsec
600 Vpk
120 Apk
500 V/µsec
1.0
Max.Off-State Leakage @ Rated Voltage 0.1 mArms
0.1 mArms
0.1 mArms
.5
20
40
60
80
AMBIENT TEMPERATURE (ºC)
ASO Max. Load Current vs. Temp.
Max. On-State Voltage Drop @ Rated Current 1.5 Vpk
1.5 Vpk
1.5 Vpk
Max.Turn-On Time
1/2 cycle 0.1 msec 1/2 cycle 0.1 msec 1/2 cycle 0.1 msec
Max. Turn-Off TIme
1/2 cycle
1/2 cycle
1/2 cycle
Power Factor (Min.) WIth Max. Load
0.5
0.5
0.5
.950
(24.1)
.200
(5.1)
GENERAL SPECIFICATIONS
Dielectric Strength ➁
Insulation Resistance (Min.) @ 500 Vdc ➁
2500 Vrms
10⁹ Ohm
LOAD
.500
(12.7)
CONTROL
.250
(6.3)
12
3
4
.030
(0.8)
.100
(2.5)
.015
(0.4)
.500
(12.7)
.700
(17.8)
PIN 1: AC LOAD
PIN 2: AC LOAD
- ^{PIN 3: +DC CONTROL}
PIN 4: DC CONTROL
APPROVALS
UL E116950
CSA LR81689
FastFax Document No.103
SERIES AO, ASO.
Rev. 031602
PAGE 1 OF 1
Max. Capacitance
8.0 pF
Ambient Operating Temperature Range
-30 to 80ºC
Ambient Storage Temperature Range
-30 to 125ºC
M ECHANICAL SPECIFICATIONS
Weight: (typical)
0.15 oz. (4.3 g)
Encapsulation:
Thermally Conductive Epoxy
GENERAL NOTES
©2002 CRYDOM CORP, Specifications subject to change without notice.
➀ All parameters at 25ºC unless otherwise specified.
➁ Dielectric and insulation resistance are measured between input and output.
➂ Off-State dv/dt test method per EIA/NARM standard RS-443.
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]