AND190HW Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Ultra Bright LED Lamps

Weight: 1.0g
Unit: mm
10.0±0.2
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
AND190HW
Ultra Bright LED Lamps
AND190HW
InGaN High Brightness White Light Emission
T-3 Package (10 mm)
Features
• New emission material (InGaN) white LED
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 1 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive use.
Maximum Ratings (T_a = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
I_F
V_R
P_D
T_Opr
T_Stg
Rating
30
5
108
-40 to 85
-40 to 85
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol Test Condition
Forward Voltage
Reverse Current
Luminous Intensity
Chromaticity Coordinates
Full Viewing Angle
V_F
I_F = 20 mA
I_R
V_R = 5 V
I_V
I_F = 20 mA
x
I_F = 10 mA
y
I_F = 10 mA
θ
I_V = 1/2 Peak
Minimum
–
–
3,300
–
–
–
Typical
3.7
–
6,000
0.33
0.34
40
Maximum
4.3
10
–
–
–
–
Unit
V
µA
mcd
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
3. Absolute secure counter measures against static electricity and surge should be taken when handling these
products. It is recommended to use wrist band or antistatic gloves when handling these LEDs.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
4/4/05