|
AND124G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Standard LED T-1 Package (3 mm) | |||
|
Weight: 0:30 g
ø3.8 ± 0.2
ø3.1 ± 0.2
Unit: mm
AND124G
Standard LED
T-1 Package (3 mm)
Features
⢠Low power requirement
⢠Stand-off or ï¬ush-mount
⢠All plastic molded lens
⢠Color: GaPâGreen
AND124G
Standard Bright LED LAMPS
0.5
0.5
2.54
1
2
1. Anode
2. Cathode
Optical Characteristics (Ta = 25°C)
Part
Number
AND124G
Color
LED
Green
Lens
Green
Lens
Desc.
Axial Luminous
Intensity (mcd)
Min. Typ.
Test
Condition
(IFâmA)
Viewing
Angle
2θ1/2
(deg)
Diffused 8
20
10
60
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current (DC)
IF
25
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
105
mW
Operating Temperature
TOpr
-40 to +85
°C
Storage Temperature Range
TStg
-40 to +85
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Green
Symbol
Test Condition
Unit
Min.
Typ.
Max.
Forward Voltage
VF
IF = 20mA
â
2.1
2.5
V
Reverse Current
IR
VR = 5 V
â
â
10
µA
Peak Emission Wavelength
λp
IF = 15mA
â
565
â
nm
Spectral Line Half Width
λ
IF = 15mA
â
30
â
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead
forming.
Product speciï¬cations contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
4/4/05
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠email@purdyelectronics.com
1
www.purdyelectronics.com
|
▷ |