AM1L-0505SH30-N Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 1 watt dc-dc converters

AM1L-N Series
1 watt dc-dc converters
• ^{SMD PACKAGE}
• ^{LOW RIPPLE & NOISE}
• ^{HIGH EFFICIENCY UP TO 75%}
• ^{UL94-VO PACKAGE}
• ^{INPUT/OUTPUT ISOLATION: 1000 & 3000VDC}
• ^{OPERATING TEMPERATURE: -40°C ... +85°C}
• ^{PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS}
GENERAL DESCRIPTION
Our AM1L-N series is a family of cost effective 1W sin-
gle and dual output DC-DC converters. These converters
combines a miniature SMD package with 1000 &
3000VDC input/output isolation voltage.
Ninety six models operate from input voltages of 3.3, 5, 12 & 24VDC
with producing output voltage levels of 3.3, 5, 9, 12, 15, 24, ±3.3, ±5,
±9, ±12, ±15 & ±24VDC. Full SMD-design and a 100% production
test of parameters ensures a high reliability in this product.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage range
Filter
±10 %
Capacitor
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Capacitance
1000 & 3000VDC
> 1000MOhm
60pF, typ.
General Specifications:
Efficiency
Switching Frequency
75% (typ)
100KHz, typ. 100% load
Physical Specifications
Dimensions
single out 12.7x11.2x6.3 mm
dual out 15.3x11.2x6.3 mm
single & dual 3000VDC 15.2x11.2x6.25 mm
Weight
1.5 g
Case material
Plastic UL94-VO
Output Specifications:
Voltage accuracy
±5%, max.
Voltage balance (Dual Output) ±2%
Ripple & noise (at 20MHz BW) 150mVp-p, max.
Short circuit protection
1 sec.
Line voltage regulation
±1.2%/1% of Vin, max.
Load voltage regulation
10% max.
(load 10...100%)
Temperature Coefficient
±0.03%/°C, max.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
Storage temperature
-55°C ... +125°C
Case temperature
+95°C, max.
Derating
None required
Humidity (non-condensing) Up to 90%
Cooling
Free-air Convection
MTBF: > 980,000 hrs single, > 1,000,000 hrs dual (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification
OUTLINE DIMENSIONS FOR SINGLE OUTPUT MODELS
Pin
Single
1
-V Input
2
+V Input
4
-V Output
5
+V Output
3
N.C.
6
N.C.
7
N.C.
8
N.C.
27
Continued on next page
VISIT US AT WWW.AIMTEC.CA