|
ADAM-4541 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Fiber Optic to RS-232/422/485 Converter | |||
|
ADAM-4541/4542
Fiber Optic to RS-232/
422/485 Converter
Features
⢠Compact size economizes space
⢠Direct plug-and-play
⢠Easily mounted on a DIN-rail, panel or piggyback
⢠Transmission speeds of up to 115.2 Kbps
⢠Optical fibers enable transmission of 2.5 km for ADAM-4541
and 15 km for ADAM-4542
⢠Half/Full-duplex, bidirectional transmission mode
⢠Avoids lightning strikes and EMI/RFI interference
⢠Prevents damage from electrostatic discharge
⢠Stable and error-free data transmission
⢠Automatic internal RS-485 bus supervision
⢠No external flow control signals required for RS-485
⢠Transient suppression and over-current protection on RS-422/
485 data lines
⢠Reserved space for termination resistors
⢠LED for power and data flow indication
⢠Power requirement: +10 to + 30 VDC
Introduction
Fiber optic transmission offers the benefits of wide bandwidth, immunity
to EMI/RFI interference, and secure data transmission. ADAM-4541/
ADAM-4542 can be used as an RS-232/422/485 point-to-point or point-
to-mutipoint connection for transmitting and converting full/half-duplex
signals and their equivalents within a fiber optic environment. Fiber optics
is the perfect solution for applications where the transmission medium
must be protected from electrical exposure, lightning, atmospheric
conditions or chemical corrosion.
The ADAM-4541/4542 is specifically designed to link various machinery
equipped with an RS-232/422/485 communication ports (such as
computer systems or manufacturing machines). Using standard ST
connectors, the module's fiber optic ports can accommodate a wide range
of fiber optic cable sizes, including 62.5/125 (9/125) µm.
Advantages of Fiber Optics
All Dielectric
⢠Low signal radiation
⢠Secure transmission
⢠Lightning immunity
⢠High-voltage installation
Small Size
⢠Less duct space
⢠Fewer additional ducts installed
Low Attenuation
⢠Greater distance / fewer repeaters
⢠Less installation and maintenance
Optical Signals
⢠No ground loops
⢠No spark hazard
⢠Operation in flammable areas
High Bandwidth
⢠Future signal capacity expansion
Specifications
Fiber Optics
Wavelength
ADAM-4541
multi-mode
820 nm
Transmission Distance
Optical Power Budget
(attenuation)
Power Consumption
2.5 km
12.5 dB
1 W (typical);
1.5 W (max.)
ADAM-4542
single-mode
1310 nm
15 km
9 dB
1.6 W (typical);
2.1 W (max.)
⢠Casing: ABS with captive mounting hardware
⢠Communication mode: Asynchronous
⢠Connector: Plug-in screw terminal
⢠Fiber port: ST
⢠Transmission mode: Full/half-duplex, bidirectional
⢠Transmission rate: Up to 115. 2 Kbps
⢠Operating temperature: -10 ~ 70° C (14 ~ 158° F)
⢠Operating humidity: 5 ~ 95% (non-condensing)
⢠Accessories (included): Nylon DIN-rail mounting adapter, SECC
panel mounting bracket
Ordering Information
â ADAM-4541: Mulit-Mode Fiber optic to RS-232/422/485
converter with mounting bracket
â ADAM-4542: Single-Mode Fiber optic to RS-232/422/485
converter with mounting bracket
6-24
Daughterboards and Modules
|