|
ACE716 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RUGGED AC/DC INPUT 150W POWER SUPPLY | |||
|
www.locamation.com
ACE-716 Rugged AC/DC Input 150W Power Supply
PFC
BAUART
GEPR FT
¤
T V Rheinland
SPECIFICATIONS
â Input Table :
Model
Input Range
ACE-716A/716AP
ACE-716T
ACE-716C
85~135V AC or
180~265V AC, 47~440Hz
-36 ~ -72V DC
+19 ~ +30V DC
Input Current
4A@115V AC or
2A@230V AC
6A@-48V DC
12A@+24V DC
â Output Table (at 50oC) :
Model
Rated Load
Max. Output
+5V +12V -5V -12V +5V +12V -5V -12V
ACE-716A/716AP 18A 4A 0.5A 1A 25A 10A 1A 1A
ACE-716T
18A 4A 0.5A 1A 25A 10A 1A 1.5A
ACE-716C
18A 4A 0.5A 1A 25A 10A 1A 1.5A
â Inrush Current (ACE-716A/716AP) : Not exceed 15A@115V AC
or 30A@230V AC
â Ripple and Noise : Less than 100mV
â Line Regulation : The line regulation for each outputs are less
than â1%, while measuring at rated loading and â10% of input
voltage changing
â Load Regulation :
â ACE-716A/716AP : Less than â3%@â5V and -12V, â6%@+12V
â ACE-716T/C : Less than â1%@â5V and -12V, â4%@+12V
â Efficiency :
â ACE-716A/716AP : Higher than 75%
â ACE-716T/C : Higher than 70%
â Hold-up Time (ACE-716A/716AP) : 20ms (typical)@115V AC
â Altitude : 0 ~ 10,000ft
â Protection : Over voltage protection. The trip point is around
5.9V ~ 7.0V output
â Thermal Protection : Built in 110â5oC thermal switch in HS1
â Vibration : 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y
and Z axis
â Impact : 10G for 20ms once on each X, Y and Z axis
â Hi-pot isolation :
â 4300V DC, input to output for one minute
â 2200V DC, input to ground for one minute
â MTBF :
â ACE-716A : 188,800 hours
â ACE-716T : 212,050 hours
â ACE-716C : 187,490 hours
â Safety : Meets UL 478, 1012, 1950;
CSA 22.2 No. 234, VDE EN 60950
â EMI :
â Meets FCC docket 20780 curve "A",
EN50081-2 : CISPR22 "A"
â Harmonic EN 61000-3-2 for ACE-716AP
â EMS Standard (Designed to meet the
following limits) :
â EN 50082-2
â IEC 801-1 8KV (Air Discharge) criteria
B (ACE-716A/716AP)
â IEC 801-3, 10V/M criteria A
â IEC 801-4, 2KV criteria B
(ACE-716A/716AP)
â IEC 801-5, 2KV criteria B
(ACE-716A/716AP)
â Built-in cooling fan
â Operating Temperature : -20o ~ 70oC
(Derating curve will occur 50o ~ 70oC)
â Storage Temperature : -20o ~ 85oC
â Dimensions : 97(W) x 40.5(H) x 198(D)mm;
(3.8" x 1.6" x 7.8")
ORDERING INFORMATION
ACE-716AP
Rugged AC input 150W PFC power supply
ACE-716A
Rugged AC input 150W power supply
ACE-716T
Rugged 48V DC input 150W power supply
ACE-716C
Rugged 24V DC input 150W power supply
DIMENSIONS
Auke Vleerstraat 26 7521 PG Enschede The Netherlands Phone +31 (0)53 480 33 66 Fax +31 (0)53 435 32 91 Email sales@locamation.nl
8-13
|