8M052489 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 8m Class DC to AC Inverter

8m052489
+Vin
0
approx. 5 ms*
5% - 100%
* should be selected to be ⁺
(1)
compatible with LCD and
display driver
Vin
-
13
2
3 Dimming Options
(valid when the "C" jumper is removed)
Pulse-Width
Modulated Controlled
+Vin
100 Kohms*
* value should be low
enough to maintain
minimum tube current
at minimum brightness
+
(1)
Vin
-
13
2
Resistive Controlled
Vmin* to +Vin
* Vmin should be high
enough to maintain
minimum tube current
+
(1)
Vin
-
13
2
Voltage Controlled
Note 1 Input by-pass capacitor (25 uf - 100uf) may be required to
reduce reflected ripple.
Endicott Research Group, Inc.
2601 Wayne St., Endicott NY 13760
607-754-9187
page 4.
Endicott Research Group, Inc.
2601 Wayne St., Endicott NY 13760
607-754-9187 Fax [phone]
http://www.ergpower.com
Specifications and
Applications Information
12/14/00
Preliminary
8m052489
8m Class
DC to AC Inverter
The ERG 8m052489 (8m Class) low profile dc to ac
inverter is specifically designed to power the Samsung
LTN104S2-L01 LCD display module to a moderate
brightness level from a +5 volt dc source.
This low profile inverter features:
ü Less Than 8 mm in Height
ü LCD Module Specific
ü Display Compatible Output Connector
ü Firm Specifications
ü Application Information
ü Designed, Manufactured and Supported in the
USA
ü Custom Input and Output Voltages
ü Flexible System Interface
ü Notebook Display Head Compatible
8m Package
Package Configuration
1234
Input
.55[14,0]
c
.120[3,05]
Dia.(2x)
2.35[59,7]
3.58[90,9]
Pin Descriptions
Input Connector
Output Connector
4 pins are 0.315" [8,00] Long,
0.025" [0,63] Square and are
on 0.100" [2,54] Centers.
JST
SM02B-BHSS-1-TB
Con1-1 Vin(+)
Con1-2 GND
Con1-3 Control *
Con1-4 NC
* Valid when the "C" Jumper
is removed
Con2-1 ACout
Con2-2 ACout
.50[12,7]
1
.043[1,09]
.55[14,0]
Output
.12[3,05]
.79[20,1]