812012 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – EC Safety Data Sheet

EC Safety Data Sheet according to Directive 1907/2006
Trade name: Solder-wire KS 115 FLOWTIN ® TSC
Date of issue: 15.12.2005 Revised on: 24.05.2011
Date of print: 08.11.2011
Page: 1(3)
1. Name of product, characterization and company name
Information on the product
Trade name:
Usage of the product / preparation
Solder-wire KS 115 FLOWTIN ® TSC
Solder wire for soft soldering
Identification of the manufacturer / supplier
Address:
MULTICOMP Premier Farnell plc
150 Armley Road
LEEDS LS12 2QQ
Phone:
[phone]
Fax:
Emergency call:
[phone] (During office hours only)
E-mail:
2. Possible hazards:
Not a composition for the purposes of the Dangerous Substances Regulations, but nevertheless observe items 4-16
3. Composition/Information on the components
Chemical characterization: Tin-copper-silver alloy (with <0,1 % other iron-metals) with flux max. 3,5 % modified resin
(halide-activated)
Composition according to EC 1907/2006:
Contents CAS No.
EINECS No.
remainder 7440-31-5
231-141-8
0,6-0,8% 7440-50-8
231-159-6
3,6-4,0% 7440-22-4
231-131-3
<3,5%
Symbols
R-phrases:
Substance
Tin
copper
silver
modified resin
The wording of the R-phrases stated is indicated in Section 16
4. First Aid measures
General information:
After inhalation:
After skin contact:
After eye contact:
After ingestion:
Hints for doctors.
Physician's information
Treatment:
5. Fire fighting measures
If casualty is unconscious but breathing, place in the recovery position. If breathing
has stopped apply artificial resuscitation or give oxygen by mask
Remove patient to fresh air. If irritation resists, obtain medical attention.
If any skin irritation develops seek medical attention
Flush immediately with plenty of water. In cases where spitting flux has entered
the eye seek medical attention.
Rinse mouth immediately and drink plenty of water. Seek medical advice.
Inhalation of the flux fumes given off at soldering temperatures will irritate the nose,
throat and respiratory system. Repeated or prolonged exposure to flux fumes
may cause shortness of breath and cough..
Decontamination, treatment of symptoms.
Suitable extinguishing media:
Special protective equipment for fire
fighting
Use extinguishing media appropriate to surrounding fire conditions
Wear self-contained breathing apparatus and protective clothing to prevent contact with
skin and eyes.
6. Accidental release measures
Pick up and place in appropriate container
7. Handling and storage
The fumes produced during soldering should be extracted away from the breathing zone of the operators. Ensure the area is well
ventilated. Wash hands with soap and warm water after handling, particularly before eating, drinking or smoking.
The product should be stored in a cool, dry area.