|
41FJ020 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Power Transformer | |||
|
Power Transformer
41FJ020
2.74
2.24
1.25
2.28
6.69
.390
1
5
4
2
3
2-.260 x .190
3.25
3.65
Dimensions: In.
Specifications:
⢠Primary voltage: 115VAC 60Hz
⢠Primary exciting current: 100mA (max.)
⢠Secondary voltage (no load): 20.6CT VAC±0.8V%
⢠Secondary voltage (full load): 18.0CT VAC±0.8V%
⢠Rated secondary current: 2.0 Amperes (AC) 60Hz
⢠Voltage regulation: less than 15% (VNL-VFL)/(VFL)x100
⢠Temperature rise (@ room temp. 25ËC): less than 95ËC
⢠Breakdown voltage (HiPOT): 2000VAC 50Hz, 1minute
⢠Coil to coil insulation: 100M⦠(min.) 500VDC
⢠Strain relief: 10 lbs.
⢠Channel frame material & thickness: iron 0.4"
⢠Crossover insulation: .002" polyester tape
⢠Primary winding: SWG28
⢠Secondary winding: SWG22+28
⢠Core size: EI-66
⢠Core material: hilite core H-23 .02"
⢠Inner insulation: 3 layers of .002" polyester tape
⢠Outer wrap insulation: 3 layers of 0.05mm polyester
tape w/1 pc. of fiber board (yellow)
⢠Bobbin: nylon, normal type .87" x 1.8"
⢠Impregnation: varnish
⢠Lead wire: Pri. AWG22, Sec. AWG18 or AWG22
XICON PASSIVE COMPONENTS ⢠(800) 628-0544
XC-6S0p0e0c7if2ications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on produDceartdeoRcuemveisnetadt:ion1.1/2/05
|