3216CP Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 3216CP Series Circuit Protector

Description
• Surface mount circuit protector
• Compatible with reflow and wave solder
• Excellent environmental integrity
• One time positive disconnect
• Ampere rating marked and oriented facing up in carrier
• Solder-free design provides excellent temperature
cycling
• Heat and shock tolerant
ELECTRICAL CHARACTERISTICS
% of Amp Rating
Opening Time
100%
4 Hours Minimum
250%
10 Seconds Maximum
600%
1 millisecond typical
Agency Information
• UL Recognition Guide & File numbers: JDYX2 & E19180.
• CSA Certification Record No: 053787 C 000 & Class No:
1422 30.
Environmental Data
• Thermal Shock: MIL-STD-202, Method 107, Test
Condition B (-65°C to 125°C)
• Vibration: MIL-STD-202, Method 204, Test Condition C
(55 to 2000 Hz, 10G)
• Moisture Resistance: MIL-STD-202, Method 106,
10 day cycle
• Solderability: ANSI/J-STD-002, Test B
Soldering Method
• Wave Solder: 260°C, 10 sec max.
• Infrared Reflow: 260°C, 30 sec max.
Ordering
• Specify product code and packaging code
Chip^™ Fuses
3216CP Series Circuit Protector
Dimensions
⁄mm
(inches)
Drawing Not to Scale
Land Pattern
Product Code
3216CP-250mA
3216CP-375mA
3216CP-500mA
3216CP-750mA
3216CP-1A
3216CP-1.5A
3216CP-2A
3216CP-2.5A
3216CP-3A
3216CP-4A
3216CP-4.5A
3216CP-5A
Voltage
Rating
(DC)
24V
24V
24V
24V
24V
24V
24V
24V
24V
24V
24V
24V
SPECIFICATIONS
Interrupting
Resistance
Rating*
(ohms)**
24V DC
Typ.
35A
4.50
35A
1.80
35A
1.15
35A
0.75
35A
0.168
35A
0.098
35A
0.063
35A
0.046
35A
0.037
35A
0.019
35A
0.014
35A
0.013
* DC Interrupting Rating (Measured at designated voltage, time constant of less than 50 microseconds, battery source)
** DC Cold Resistance (Measured at 10% of rated current)
† Typical Melting I²t (Measured with a battery bank at rated DC voltage, 10x-rated current, time constant of calibrated
circuit less than 50 microseconds)
‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)
• It is recommended that fuses be mounted with glass (blue) side facing up.
• Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is
recommended, with further derating required at elevated ambient temperatures.
Typical
Melt
I²t†
0.000084
0.0002
0.0019
0.00095
0.007
0.029
0.049
0.112
0.165
0.189
0.328
0.619
Typical
Voltage
Drop (V)‡
1.4
0.73
0.66
0.63
0.2
0.18
0.16
0.14
0.13
0.11
0.1
0.09