2SD106A Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Ultra-compact dual SCALE driver for IGBTs with blocking voltages up to 1200V

CT-Concept Technology Ltd. - 2SD106A - 2 channel driver for IGBTs up to 1200V
The 2SD 106A is an ultra-compact dual SCALE driver for IGBTs with
blocking voltages up to 1200V. The two drive channels feature an electrical
isolation between the control electronics and the power section.
Each channel is equipped with a programmable Vce monitoring function for
protection against short circuit and over-current. The driver supplies a
gate current of +/-6A. The gate voltage is +/-15V. The integrated DC/DC
converter supplies a drive power of 1 W per channel.
The interface is compatible to all logic families (5...15V). The driver can be
operated in two modes: either with two independent driver channels or as a
half-bridge driver with internal dead-time generation.
Parameter
Nominal supply voltage VDC, VDD
Supply current without load IDC + IDD
Supply current with maximal load Last IDC + IDD
Output power DC/DC converter (both channels)
Efficiency DC/DC converter
Delay time input to output (turn on)
Delay time input to output (turn off)
Peak output current (gate current) IG
Output rise time
Output fall time
Isolation test voltage (Vac/50Hz/1min)
Partial discharge extinction voltage acc. IEC270
Creep paht input to output
Guaranteed dv/dt immunity (input to output) dV/dt
Operating temperature 2SD106AI
Operating temperature 2SD106AN
min
typ
max
unit
15
Vdc
35
mA
170
mA
2
W
85
%
300
ns
350
ns
-6
+6
A
100
ns
80
ns
4000
Vac
>1200
Vpeak
12,7
mm
100
kV/µs
-40
+85
°C
0
+70
°C
http://local/cd-rom/english/products/2SD106/2SD106A.htm (1 von 2) [26.05.1999 22:57:33]