2502-2 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – MOUNTING BRACKET KIT INSTALLATION INSTRUCTIONS

1-800-669-9690
R
O
A
D
M
A
S
T
E
R
MOUNTING BRACKET KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, INC.
5602 N.E. SKYPORT WAY
PARTS LIST:
1- MAIN BRACE (A) - Passenger side
1- MAIN BRACE (B) - Driver's side
PORTLAND, OR 97218
1-800-669-9690
FAX [phone]
KIT NO. 2502-2
12-11-97
CAUTION
SAFETY CABLES MUST CONNECT THE TOWING
VEHICLE TO THE TOWED VEHICLE FRAME TO FRAME.
FOLLOW SAFETY INFORMATION IN WARRANTY PACKET
WARNING:
• DO NOT USE THIS DOCUMENT FOR CUSTOM FABRICATION AS THIS ILLUSTRATION MAY NOT SHOW ALL PARTS
OR STRUCTURAL COMPONENTS.
• ROADMASTER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE OR INJURY RESULTING FROM ANY MODIFICATION
OR ALTERATION.
• OWNER MUST INSPECT ALL MOUNTS AND BRACKETS BEFORE EACH USE FOR CRACKS OR OTHER SIGNS OF
FATIGUE. ALSO INSPECT FASTENERS FOR PROPER TORQUE.
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT
IN DEATH, PERSONAL INJURY OR PROPERTY DAMAGE
IMPORTANT: All brackets must be assembled with all the bolts left loose for final adjustment &
positioning (before tightening) unless otherwise instructed. All bolts must be torqued for proper strength.
If more than one bolt is used per fastening point, the diagram may only show one.
• Use flat washers over all slotted holes • Use lock washers on all fasteners