2010-002 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – DIGITAL ACCELEROMETER MODULE

SILICON DESIGNS, INC
! Capacitive Micromachined
! Nitrogen Damped
! Digital Pulse Density Output
! Low Power Consumption
! -55 to +125EC Operation
! Rugged Anodized Aluminum Module
! Four Wire Connection
! TTL/CMOS Compatible
! +5 VDC, 2 mA Power (typical)
! Easy Interface to Microprocessors
or the model 3320 G-LOGGER_TM
! Good EMI Resistance
! Responds to DC & AC Acceleration
! Non Standard g Ranges Available
! Serialized for Traceability
Model 2010
DIGITAL ACCELEROMETER MODULE
DESCRIPTION
The model 2010 single axis accelerometer module is designed to be used with the
model 3020 G-LOGGER_TM Acceleration Acquisition System. Up to three 2010's
may be connected to a G-LOGGER_TM using a model 3901 Cable Adapter. The
2010 contains a model 1010L accelerometer which features a micromachined
capacitive sense element, a custom integrated circuit sense amplifier, and sigma-
delta A/D converter. It provides a TTL/CMOS compatible output signal for
measuring accelerations in commercial/industrial environments and is tailored for
zero to medium frequency instrumentation applications. The anodized aluminum
case is epoxy sealed and is easily mounted via two #4 (or M3) screws. It is
relatively insensitive to temperature changes and gradients. An optional calibration
sheet (2010-CAL) and periodic calibration checking are available.
OPERATION
The model 2010 accelerometer produces a digital pulse
train in which the density of pulses (number of pulses per
second) is proportional to applied acceleration. It requires
a single +5VDC power supply and a TTL/CMOS level clock
of 100kHz-1MHz. The output is ratiometric to the clock
frequency and independent of the power supply voltage.
The sensitive axis is perpendicular to the bottom of the
package, with positive acceleration defined as a force
pushing on the bottom of the package. External digital line
drivers can be used to drive long cables or when used in
an electrically noisy environment.
ORDERING INFORMATION
Full Scale
Model
Acceleration Number
± 2g
± 5g
± 10 g
± 25 g
± 50 g
± 100 g
± 200 g
2010-002
2010-005
2010-010
2010-025
2010-050
2010-100
2010-200
SIGNALS
+5V:
DC Power (red wire)
GND: Ground. (black wire, isolated from aluminum case)
SHIELD: Cable shield electrically connected to aluminum case.
CLK: Input reference clock; 100Khz-1MHz (white wire).
CNT: Count (digital pulse stream) output (green wire)
Silicon Designs, Inc. ! 1445-NW Mall Street, Issaquah, WA 98027-5344 ! Phone: [phone] ! Fax: [phone]
web site: www.silicondesigns.com
[page 1]
Sep 07