English
Language : 

1N4001G Datasheet, PDF (1/2 Pages) NXP Semiconductors – Rectifiers(Rugged glass package, using a high temperature alloyed construction)
GLASS PASSIVATED RECTIFIER
1N4001G THRU 1N4007G
VOLTAGE RANGE
CURRENT
FEATURES
• Glass passivated chip junction
• Low forward voltage
• Low reverse leakage
• High forward surge current capacity
• High temperature soldering guaranteed:
260 /10 seconds, 0.375” (9.5mm) lead length
50 to 1000 Volts
1.0 Ampere
MECHANICAL DATA
• Case: transfer molded plastic
• Epoxy: UL94V – 0 rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E
method 208C
• Mounting position: any
• Weight: 0.012 ounce, 0.33 gram
DO-41
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
1N 1N 1N 1N 1N 1N 1N
SYMBOLS
UNIT
4001G 4002G 4003G 4004G 4005G 4006G 4007G
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
0.375” (9.5mm) lead length at TA = 75OC
Peak Forward Surge Current
VRRM 50 100 200 400 600 800 1000 Volts
VRMS 35 70 140 280 420 560 700 Volts
VDC
50 100 200 400 600 800 1000 Volts
I(AV)
1.0
Amps
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 1.0A
Maximum DC Reverse Current at Rated TA = 25 OC
DC Blocking Voltage per element
TA = 125 OC
Maximum Full Load Reverse Current, full cycle
Average 0.375” (9.5mm) lead length at TL = 75 OC
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of 4.0V)
Typical Thermal Resistance (Note 1)
Operating Junction Temperature Range
Storage Temperature Range
IFSM
VF
IR
IR(AV)
CJ
RθJA
TJ
TSTG
30
1.1
5.0
50
30
15
50
(-65 to +175)
(-65 to +175)
Amps
Volts
µA
µA
pF
OC/W
OC
OC
Notes:
1. Thermal resistance from junction to ambient with 0.375” (9.5mm) lead length, PCB mounted with
0.2” x 0.2” (5.0mm x 5.0mm) copper pads
Sep-03, Rev A
Micro Electronic Instrument Inc.
 ▷