16810450A-F Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Metallized Polyester Radial Lead Capacitors

Type 168/185 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion
The Type 168/185 series radial lead metallized polyester
box capacitors are available in bulk (Type 168) or on
ammo pack or tape and reel (Type 185). These capacitors
are constructed in rugged rectangular plastic cases and
all come with 5.0 mm (0.197“) lead spacing. They are
good for general purpose applications such as bypass,
decoupling, energy storage/discharge and arc suppres-
sion.
Highlights
• Case and epoxy fill meets UL94V-0
• 5.0 mm (0.197“) lead spacing
• Bulk, tape and reel or ammo pack
• Non-inductively wound
• Non-polar
• Low leakage
• Lead material: Tinned copper wire
Specifications
RoHS Compliant
Capacitance Range: _{0.001 µF to 1.0 µF}
Voltage Range: _{50 Vdc to 400 Vdc (30 Vac to 200 Vac, 60 Hz)}
Capacitance Tolerance: _{±5%, ±10%, ±20%}
Operating Temperature Range: _{–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)}
Dielectric Withstand Voltage: _{1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC}
Dissipation Factor (DF): _{tanδ x 10} ^–4 _{at 25 ºC ±5 ºC}
Total Self Inductance (L):
Long Term Stability (after two years):
kHz C ≤0.1 µF C > 0.1 µF
1
≤100
≤100
10
≤150
≤150
100
≤300
Approximately 7 nH
Capacitance change ∆C/C ≤ ±3% under stan-
dard environmental conditions
Maximum Pulse Rise Time (dv/dt):
Vn
V/µs
50
250
63
250
100
300
250
400
400
600
If the working voltage (V) is less than the nominal voltage
(Vn), the capacitor can work at higher dv/dt. In this case, the
maximum value allowed is obtained by multiplying the above
value with the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com