0604HQ Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Chip Inductors

Document 285-1
CChhipipInIndduucctotorsrs--00660044SHMQSSeries(1610)
The 0604HQ Series offers the highest Q factors and
current handling capabilities of any inductor this small.
These parts combine the exceptionally high Q of an air
core inductor with the rugged construction of a ceramic
body component. They also provide intermediate induc-
tance values not available in Coilcraft’s 0603, 0402 or
0906 product families. Custom values may be available.
Coilcraft Designer’s Kit C151 contains samples of all
values shown. To order, contact Coilcraft or purchase
it on-line at http://order.coilcraft.com.
2_{Part number}1
0604HQ-1N1_X_
0604HQ-2N6_X_
0604HQ-4N5_X_
0604HQ-5N0_X_
0604HQ-6N8_X_
0604HQ-7N6_X_
0604HQ-10N_X_
2_Inductance2 _{Percent Q}
(nH)
2_tolerance3 2_min4
1.15 @ 500 MHz 10,5 25
2.6 @ 500 MHz 10,5 45
4.5 @ 500 MHz 10,5 50
5.0 @ 500 MHz 10,5 60
6.8 @ 500 MHz 10,5 60
7.6 @ 500 MHz 10,5 60
10.4 @ 500 MHz 10,5 60
900 MHz
L typ Q typ
1.2 40
2.6 78
4.5 103
4.9 106
6.9 101
7.4 109
10.6 103
1.7 GHz
L typ Q typ
1.2 136
2.6 163
4.7 155
5.2 178
7.4 172
7.9 137
11.5 160
SRF
2_min5
(MHz)
6000
6000
5800
5300
4700
4400
4100
DCR I_DC
2_max6 2_max7 _Color
(Ohms) (A) code
0.021
0.026
0.032
0.032
0.035
3.0 Black
2.0 Brown
1.8 Red
1.6 Orange
1.8 Yellow
0.035 1.5 Green
0.037 1.5 Blue
1. When ordering, please specify tolerance and packaging codes:
Inductance tolerance code:
Table above shows stock tolerances in bold.
J= ±5%, K= ±10%
0604HQ-10N_X_
Packaging code:
C= 7Ș machine-ready reel EIA RS-481 clear plastic
tape. (2000 per full reel)
B= Less than full reel On tape, not machine ready.
To have a leader and a trailer added ($25 charge),
use code letter C instead.
2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP4286
impedance analyzer.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 500MHz using Agilent/HP4291A with Agilent/HP16193
test fixture and on Agilent/HP8753D with Coilcraft SMD-D test fixture.
5. SRF measured using Agilent/HP8753D network analyzer and Coilcraft
SMD-D test fixture.
6. DCR measured on Cambridge Technology micro-ohmmeter and
Coilcraft CCF858 test fixture.
7. For 15° C rise.
8. Operating temperature range −40°C to +125°C.
9. Electrical specifications at 25°C.
For environmental data see Product Specifications section.
Specifications subject to change without notice. Document 285-1 Revised 9/3/02