PDB-P-L Datasheet, PDF (2/12 Pages) ETAL Group – Flexible Power-D-Box

Flexible Power-D-Box^® with pcb for 3600/2210/ESS20/ESX10
Benefits
l Less wiring time through pcb design
l Small installation depth of 205 mm or 250 mm for use where
space is at a premium
l  Removable front plate with captive screws and imprinted marking
l  30 slots for thermal-magnetic or electronic circuit breakers
in a Power-D-Box^®
l Redundancy possible with 2 x 15 ways 1-pole or
2 x 7 ways 2-pole
l Circuit breaker can be plugged in later
(even with the system on – hot-swap capability)
l Screw terminals directly on the pcb
(only positive pole), optional additional terminal on rear-side
symmetrical rail with additional negative pole patching
l Supply for cables up to 35 mm² (16 mm² when redundant)
l Supply up to 2 x 100 A (redundant)
l Load terminals for cables up to 2.5 mm²
l Load terminals up to 16 A (10 A with electronic protection)
l Group signalling by integral potential-free aux. contacts
optional – make contact connected in series – break contact
connected in parallel
l Signalling separately available per group for redundant design
l Integral cable grip rail behind the terminals
l Cover of live parts by means of perforated metal plate on top
l Blanking pieces for free slots included (30 pcs)
l Other versions are available upon request, e.g. with back-up
fuses, decoupling diodes, separate circuits, AC and/or DC,
customer-specific marking etc.
Technical Data
19“ Power-D-Box^® length: 84 modules (426.72 mm)

height: 2U (88.90 mm)

depth: 205 mm (version A0 / R0)

250 mm (version A3 / R3 / R4)

material: aluminium, partly anodised
Voltage rating:
AC 50 V; DC 65 V
Supply: studs M6 for ring cable lug (version A0 / R0)
screw terminal 35 mm² (version A3) screw
terminal 16 mm² (version R3 / R4)
max. 100 A per group (except version 2210-2P)
Version 2210-2P screw terminal 10 mm²
max. 50 A per group (at ambient
temperature T_amb < 40 °C), otherwise 40 A
Load terminals: 30 ways 1-pole protected (version A0 / A3)

2 x 15 ways 1-pole protected (version R0 / R3)
2 x 7 ways 2-pole protected (version 2210-2P)
screw terminals 2.5 mm²

max. 16 A (depending on breaker rating)
Group signalling: make contact connected in series (all
versions) and break contact connected in
parallel (not ESS20) per group
screw terminal 1.5 mm² (version A0 / R0)
screw terminal 2.5 mm² (version A3 / R3 / R4)
max. 0.5 A
Housing ground/earth: v ia M6 terminal studs on the inside,
duplicated when redundant (R0 / R3 / R4)
Ambient temperature
range:
0 … 50 °C
6
2
www.e-t-a.de
1646