EPR10 Datasheet, PDF (2/4 Pages) ETAL Group – Power Relay

Power Relay EPR10
Technical data (25 °C)
Time/current characteristic (Tamb = 25 °C)
Voltage
0 ... 32 V DC
Max. leakage current 20 µA
Max. load current
2A
no trip 100%
must trip 130 %
10
General
Typical life
> 1,000,000 cycles
Trip current

only EPR10-P (with protective function)
1.3 times rated current ± 15 %
Trip time only EPR10-P (with protective function)
selectable between 0.2 / 0.5 / 0.7 s ± 15 %
Excess temperature only EPR10-P (with protective function);
circuit will be disconnected with excess
temperature;
(reset after 500 ms OFF condition)
1
P7
P5
0.1
P2
0.01
Temperature range

-40…+85 °C in operation
-55…+90 °C for storage
Degree of protection IP57
0.001
Vibration
>6g
Chemical resistance oil, grease, alcohol, urea, extinguishing
agents, battery acid, salt mist, detergents,
humidity
0.0001
Enclosure and mounting
Material of enclosure moulded, V0 flammability rating
Terminals
tin-plated copper
1E-05
Terminal studs
stainless steel
0 1.30 2 3 4 5 6 7 8
Max. tightening torque 15 Nm (for M8 studs)
Dimensions
163 mm x 73 mm x 35 mm
... times rated current I_N
Mass
≤ 250 g
Recommended
current ratings [A] cable cross section [mm²]
cross sections

75 25
100 35
Order numbering code



125 50
150 50
175 70
Type No.
EPR10 Electronic Power Relay
Protective function

200 95
N0 without protection
P2 overcurrent trip at 1.3 x In after 200 ms
P5 overcurrent trip at 1.3 x In after 500 ms
Tests
P7 overcurrent trip at 1.3 x In after 700 ms
Design
F1 flat design
Chemical
ISO 16750-5; 2010 (interior,
5
resistance
under the hood, exterior)
Vibration resistance IS0 16750-3: 2012 (test VIII)
Mechanical Shock IS0 16750-3: 2012
(Test for devices on rigid points on
Terminals / control cable
G1 M8 terminal studs / Tyco connectors (HDSCS)
with 2 M8 nuts
G2 M8 terminal studs / Tyco connectors (HDSCS)
without M8 nuts
Load and control
HS HSS
the body and on the frame)
Version
Corrosion resistance ISO 16750-4; 2010 (5.5.1 severity level 4)
Humidity
ISO 16750-4 2010 (5.6.2.3)
Temperature change ISO 16750-4; 2010 (5.3.1)
Elektromagnetic Regulation no. 10 of the United Nations
Economic Commission
Compatibility (EMC)for Europe (UN/ECE) —
Harmonisation of vehicle regulatiolns regard-
ing electromagnetic compatibility
EN 61000-6-2: 2005
EN 61000-6-3: 2007
S0 standard
System voltage
D2 DC 12 V / 24 V
Current ratings (at 25°C)
75 A protected version only
100 A both versions
125 A protected version only
150 A protected version only
175 A protected version only
200 A both versions

EPR10 - P7 F1 G2 - HS S0 D2 - 200A ordering example
Electrostatic
Discharge (ESD)
EN 61000-6-2: 2005
EN 61000-6-3: 2007
Humidity
ISO 16750-4; 2010
Temperature shock ISO 16750-4; 2010 (Ice water shock test;
submersion test)
Free fall
ISO16750-3; 2012
Degree of protection IP57 (except terminals of load circuit)
Material moulded enclosure including epoxy with
flammability rating VO UL 94: 1996
2
www.e-t-a.de
1701