19BGT Datasheet, PDF (1/6 Pages) ETAL Group – Power-D-Box with sockets pre-wired

Power-D-Box with sockets pre-wired
Description
The compact 19“ Power-D-Box features aluminium profiled cross
members with an anodised front plate. The panel cutout accommodates
up to 30 positions numbered 1 to 30. Blanks cover unused positions,
with 6, 12, 24 or 30 being ”open“.
The rack can be fitted with plug-in type circuit breakers 3600/3900 and
2210, electronic circuit breakers ESS20 or electronic circuit protector
ESX10 or E-T-A Solid State Remote Power Controllers (SSRPC)
E-1048-600/700. Please specify the correct option according to the
1
ordering information shown, as different depths as well as different
heights of the front cut-out must be allowed for.
The devices are plugged into sockets 63-P10-Si (6 positions each).
These sockets (S1...S5) are provided with 6.3 mm blade terminals on
the rear.
Power-D-Box with sockets pre-wired
Four busbars (X1...X4) with 6 (signalisation) or 15 (feed) positions each
(6.3 mm blade terminals) provide easy terminal connection.
Prewired options available ex factory are:
l Parallel connected feed (2.5 mm²) with separate supply for each
socket via busbars X1 and X2.
Choice of wiring colours: black, red, blue, grey. Outputs are not
connected.
l Parallel connected auxiliary contacts (N/C) grouped per socket,
1 mm², via busbars X3 (supply) and X4 (signalisation).
Choice of wiring colours: black, red, blue, grey.
l Series connected auxiliary contacts (N/O) of all positions with
1 mm², via busbars X3 (feed) and X4 (signalisation).
Choice of wiring colours: black, red, blue, grey.
l Custom designed connection according to specification.
Other fittings, e.g. back-up fuse, separate circuits or redundancy,
multipole circuits, screw terminals, custom designed markings etc., are
available to special order (please enquire).
A compact printed circuit board with rear screw terminals is available
as an alternative to the standard cable wiring.
Technical data
19“ Power-D-Box

Front cutout for
30 positions, numbered
1 through 30
Mounting socket

Busbars
Feed (X1, X2)
length: 84 modules (426.72 mm)
height: 2 U (88.90 mm)
depth: 205...295 mm
(depending on the selected version)
material: aluminium, anodized
1 socket = 6 positions (No. 1 - 6)
2 sockets = 12 positions (No. 1 - 12)
3 sockets = 18 positions (No. 1 - 18)
4 sockets = 24 positions (No. 1 - 24)
5 sockets = 30 positions (No. 1 - 30)
blanks cover unused sockets.
polarised E-T-A mounting socket
type 63-P10-Si (6 positions)
rear blade terminals 6.3 mm
max. load: 16 A continuous
15-way for 6.3 mm blade terminals
max. current rating: 63 A
Busbars
6-way for 6.3 mm blade terminals
Auxiliary contacts (X3, X4) max. current rating: 32 A
Feed

busbar 50 A per socket (= 6 positions)
HO7Z-K cables 2.5 mm²
with fully insulated 6.3 mm blade terminals
to VBG 4
one cable per socket
max. current rating: 20 A
Auxiliary contact wiring
HO7Z-K cables 1 mm²
with fully insulated 6.3 mm blade terminals
to VBG 4
max. current rating: 4 A
Wire colour option
black, red, blue or grey
Voltage rating
AC 250 V/DC 65 V
Housing ground/earth


on the inside via M6 screw
by means of ring cable lug (two with
redundant systems)

2013/14
www.e-t-a.de
1 - 89