|
ET-LP2950-XX Datasheet, PDF (1/4 Pages) Estek Electronics Co. Ltd – Typical application data 100 mA adjustable regulator | |||
|
ET- LP2950-XX ET- LP2951-XX
100 mA Low Dropout Positive Voltage Regulator
Description
The MIK2950-XX/MIK2951-XX is a low power voltage regulator. This device excellent choice for use in battery powered application such
as cordless telephone, radio control systems, and portable computers.
The MIK2950-XX/MIK2951-XX features very low quiescent current (75µA Typ.) and very low drop output voltage (Typ. 40mV at light
load and 380mV at 100mA). This includes a tight initial tolerance of 0.5% typ., extremely good load and line regulation of 0.05% typ.,
and very low output temperature coefficient, making the MIK2950-XX/MIK2951-XX useful as a low-power voltage reference.
The error flag output feature is used as power-on reset for warn of a low output voltage, due to following batteries on input. Other feature
is the logic-compatible shutdown input which enable the regulator to be switched on and off. The MIK2951-XX is available in 8-pin
plastic packages. The regulator output voltage may be pin-strapped for a -XX volt or programmed from 1.24 volt to 29 volts with external
pair of resistors.
The MIK2950-XX is offered in 3-pin TO-92 package compatible with other fixed regulator.
Features
⢠High accuracy output voltage
⢠Guaranteed 100mA output
⢠Very low quiescent current
⢠Low dropout voltage
⢠Extremely tight load and line regulation
⢠Very low temperature coefficient
⢠Needs only 1mF for stability
⢠Error Flag warns of output dropout
⢠Logic-Controlled electronic shutdown
⢠Output programmable from 1.24 to 29V
Applications
⢠Battery powered systems
⢠Cordless telephones
⢠Radio control systems
⢠Portable/Palm top/Notebook computers
⢠Portable consumer equipment
⢠Portable Instrumentation
⢠Avionics
⢠Automotive Electronics
⢠SMPS Post-Regulator
⢠Voltage Reference
Typical application data 100 mA
adjustable regulator
Package information
Top view
Pin Connection MIK2951-XX
TO-92 Plastic
Package
(MIK2950-XX only)
output
sense
shutdown
ground
1
8
2
7
MIK2951-XX
3
6
4
5
input
feedback
-XX V tap
error
ï
Absolute Maximum Ratings
Parameter
Power Dissipation
Lead Temperature (Soldering, 5 seconds)
Storage Temperature Range
Operating Junction Temperature Range
Input Supply Voltage
Feedback Input Voltage
Shutdown Input Voltage
Error Comparator Output
Maximum
Internally Limited
260
-65 to+150
-55 to +150
-0.3 to +30
-1.5 to +30
-0.3 to +30
-0.3 to +30
Units
W
°C
°C
°C
V
V
V
V
Device Selection Guide (Note 1)
Device
MIK2950-2.85, MIK2951-2.85
MIK2950-3.0, MIK2951-3.0
MIK2950-3.3, MIK2951-3.3
MIK2950-5.0, MIK2951-5.0
Note 1: Other versions are available Vout = 2.9V to 5.0V
Output voltage
2.85
3.0
3.3
5.0
Page 1 of 3
BEIJING ESTEK ELECTRONICS CO.,LTD
|
▷ |