F25L008A Datasheet, PDF (1/31 Pages) Elite Semiconductor Memory Technology Inc. – 8Mbit (1Mx8) 3V Only Serial Flash Memory

ESMT
„ FEATURES
y Single supply voltage 2.7~3.6V
y Speed
- Read max frequency : 33MHz
- Fast Read max frequency : 50MHz; 100MHz
y Low power consumption
- typical active current
- 15 μ A typical standby current
y Reliability
- 100,000 typical program/erase cycles
- 20 years Data Retention
y Program
- Byte program time 7 μ s(typical)
y Erase
- Chip erase time 8s(typical)
block erase time 1sec (typical)
F25L008A
8Mbit (1Mx8)
3V Only Serial Flash Memory
- Sector erase time 60ms (typical),
y Auto Address Increment (AAI) WORD Programming
- Decrease total chip programming time over
Byte-Program operations
y SPI Serial Interface
- SPI Compatible : Mode 0 and Mode3
y End of program or erase detection
y Write Protect ( WP )
y Hold Pin ( HOLD )
y Package available
- 8-pin SOIC 200-mil
ORDERING INFORMATION
Part No.
Speed
Package
COMMENTS
F25L008A –50PAG 50MHz 8 lead SOIC 200mil Pb-free
F25L008A –100PAG 100MHz 8 lead SOIC 200mil Pb-free
F25L008A –50DG 50MHz 8 lead PDIP 300mil Pb-free
F25L008A –100DG 100MHz 8 lead PDIP 300mil Pb-free
GENERAL DESCRIPTION
The F25L008A is a 8Megablt, 3V only CMOS Serial Flash
memory device organized as 1M bytes of 8 bits. This device is
packaged in 8-lead SOIC 200mil. ESMT’s memory devices
reliably store memory data even after 100,000 program and
erase cycles.
The F25L008A features a sector erase architecture. The device
memory array is divided into 256 uniform sectors with 4K byte
each ; 16 uniform blocks with 64K byte each. Sectors can be
erased individually without affecting the data in other sectors.
Blocks can be erased individually without affecting the data in
other blocks. Whole chip erase capabilities provide the flexibility
to revise the data in the device.
The sector protect/unprotect feature disables both program and
erase operations in any combination of the sectors of the
memory.
Elite Semiconductor Memory Technology Inc.
Publication Date: May. 2007
Revision: 1.4 1/31