203496 Datasheet, PDF (2/2 Pages) ERNI Electronics – MOD JACK - MJLS

Section A-A
0,40 0,016 0,05
Section B-B
6 ^{2,00 0,079}
1
4,00 0,157
A
5,00 0,197
12,40 0,488
5 ^{15,90 0,626}
B
1,35 0,053
"A"
12,40 0,488
16,10 0,634
28,00 1,102
4
1,35 0,053
ROLL DIRECTION
B
6
A
R0,30 _{0,012 (TYP)}
Detail "A"
M 5:1
R0,75 ^0,030
TAPE AND REEL INFORMATION
120 CONNECTORS PER REEL
50,00 1,969
ROLL DIRECTION
13,00 0,512
330
203495 TAPE & REEL PACKAGE
ROLL _{DIRECTION 1:1}
NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2
NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm
NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE
NOTE 4: MEASURED ON A PLANE 0,3 MM ABOVE THE BOTTOM OF THE POCKET
NOTE 5: MEASURED FROM A PLANE ON THE INSIDE BOTTOM OF THE POCKET TO THE TOP SURFACE OF THE CARRIER
NOTE 6: POKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET; NOT POCKET HOLE
Information:
Tolerances
Scale
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
MOD JACK - MJLS
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 1X1, SMT, CAT 3/4
before using.
b
11.05.2010
www.ERNI.com
203496
I (2/2)
A3
Index
Date
Class
MJ