324227 Datasheet, PDF (1/1 Pages) ERNI Electronics – M12 8 pin / M12 m 8 pin

K a b e ltü lle
C able
sleeve
TECHNISCHE SKIZZE / Technical sketch
Kabelaufdruc k
(B s p .)
C able imprint (e.g.)
E R N I A rt.-
N r.
P a rt N o .
Production date
e.g.: KW42 2006
K a b e ltü lle
C able
sleeve
ERNI XXXXXX PUR 8x0.25 422006
BAUTEILE / FERTIGUNGSHINWEISE
Piece parts / Manufacturing notices
- Kabelaufdruck mittels Tintenstrahldrucker entspr. Techn. Skizze
Cable imprint with ink-jet printer see technical sketch
- Gute Chemikalien- und Ölbeständigkeit (Ölbeständigkeit gilt nicht für den
Einsatz mit PVC-Kabel). Beim Einsatz aggressiver Medien ist die
Materialbeständigkeit applikationsbezogen zu überprüfen.
Good chemical and oil resistance (parts with PVC-cable are not restistant).
When using agressive media, material resistance based on application
must be checked.
STROMLAUFPLAN / Schematic diagram
47,5
see table
47,5
1
Litze weiss
flexible conductor white
1
5
4
3
8
6
Ansicht: Steckgesicht Messer; Kontaktbelegung /
View: mating face male; pin assignment
7
M 2:1
5
4
6
3
8
7
2
Litze braun
flexible conductor brown
2
3
Litze grün
flexible conductor green
3
4
Litze gelb
flexible conductor yellow
4
5
Litze grau
flexible conductor gray
5
2
1
2
1
6
Litze pink
flexible conductor pink
6
7
Litze blau
flexible conductor blue
7
8
Litze rot
flexible conductor red
8
SPECIFICATIONS Circular Connector
Technical Specifications
Standard applic.
Value
Electrical Data
Standard applic. Value
Housing:
M12 male, straight, black M12
male, straight black
Rated (nominal) voltage; max. IEC 61-076-2-101 30 V DC
Rated current; per contact, max. IEC 61-076-2-101 2 A
Pin assignment:
8 pin
Rated impulse voltage
IEC 61-076-2-101 0,8 kV
Coding:
A-coding
Connection:
Screw locking
Approvals
pluggable, screw locking, A/F 13
recommended breakaway
torque 0,6 Nm
Protection class
LED:
Pa cka ging:
-
1 piece per bag
Materials & Finish
Contact material:
a) male
Standard description
b) female Standard description
Contact finish, mating zone:
a) male
Thickness of plating
b) female Thickness of plating
Screw material:
Standard description
Screw plating:
Standard description
CuZn39Pb3F50
-
0,5 µm Au over 2 µm Ni
-
Zinc pressure die casting
Ni 4-6 µm
Cable (additional info see table)
Jacket color
Conductor cross-section
Bending radius min.
gray ( RAL 7001 )
8 x 0,25 mm²
15 x jacket diameter
(mated and locked)
Pollution degree
Insulation category
RoHS compliant
IEC 60529
IEC 60664-1
Part Marking (cable imprint)
Part number
Company Logo
Date of manufacturing
Jacket material
Flex. conductor diameter
Transmissinon Characteristics IEC 11801
IP 65/67
3
I
Ye s
required
required
required
required
required
Class D
Artikel-Nr.
Part No.
Leitungslänge (A)
Cable length (A)
Kupfer-
gewicht
Copper
weight
Schirm
shield
Kabelmantel
Jacket
material
Außendurchmesser
Jacket diameter
Aderisolation
Wire isolation
Zul. Temp.-Bereich
für Kabel
Permissable temp.
for cable
464933 500 +50 mm [23.62 +2,4 in]
1.000 +100 mm [39.37 +4 in]
1.500 +100 mm [59.05 +4 in]
2.000 +100 mm [78,74 +4 in]
26,6 g
PUR,
shielded
7 mm 5%
[0.263 in 5%]
-40... +80 °C
(permanently
PP
installed)
-20... +80 °C
(movably mounted)
3.000 + 100 mm [118,11 +4 in]
Information:
Tolerances
Scale
1:1
All Dimensions
in mm
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
M12 8 pin / M12 m 8 pin
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
Male, A-coding, shielded
before using.
www.ERNI.com
324227
I
16.08.2012
A3
Index
Date
Class
CCCS