203529 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK- MJE

RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
2,04 0,08
1,603,^±₂⁰₀^,07±0,0₀^,₇^0603,12±0₆^,0₀^{03±0,0X02276}
X2
1,02 0,04
1,78 0,07
2,78 0,11
8
2
7
1
12,70 0,50
0,90(x8)
15,75 0,25 [0,62±0,01]
6,80 0,25 ^{[0,267±0,01]}
12,70 0,50
10,00 0,39
16,50 0,25 [0,649±0,001]
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
17,0 0,67
5,40 0,2[0,212±0,008]
3,38 0,03 [0,0242±0,001]
3,43 0,2 [0,135±0,008]
Technical specifications
1,20 0,05
Materials & Finish
Insulation body
PA46 GF30
Contact material
Phosphor Bronze (C5210)
Contact finish, mating zone 30µin Au
Contact finish, termination zone Au flash
Underplating
20-50µin Ni
Shell/shield material
C2680 (acc. JIS)
Shell/shield plating
20-50µin Ni
Assembly Process
Packaging
Solder temperature
Suitable assembly process
Tray
260°C at 3-5s
wave
Approvals
UL insulation body
UL File No.
RoHS compliant
V0
E145613
Yes
Mechanical properties
Insertion/withdrawal force
Mechanical operations
Effectiveness of connector
coupling device
Std. applicable
IEC 603-7 max. 20 N
IEC 512-5, 9a min. 1.000
IEC 512-8, 15f
50 N
Electrical properties
Creepage / clearance distances
a) Contact - contact
IEC 807-3
0,52 mm
b) Contact - shell
IEC 807-3
min 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/ testpane IEC 512-2, 4a min. 1.500 V AC/DC
Current carrying capacity IEC 512-3, 5b
1.5 A @ 25°C
Contact resistance
IEC 512-2, 2a max. 30 mOhm
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
Environmental properties
Operation temperature
-40 to +85°C
1:1
Notes: Cavity confirms to FCC Rules and Regulations Part 68, Subpart F
NO.
IDENT. NR.
203530
Information:
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
Index
11.12.2013
Date
Tolerances
Scale
2:1
x 0,50
x.x 0,38
x.xx 0,25
All Dimensions
in mm
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK- MJE
8P8C, 1X1
www.ERNI.com
203529
Class
MJ
I (1/1)
A3