203493 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

25,40 ±0,25 1,000 ±0,010
31,12 1,225
13,97 0,550
1
8
1
8
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
32,22 1,269
TOP OF PCB
LP
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
NOTED
24,13 0,950
12,70 0,500
10,16 0,400
2,54 0,100
1,27 0,050
0,89 ±0,25 0,035 ±0,010 x16
3,25 ±0,25 0,128 ±0,010 x2
1,60 ±0,250 0,063 ±0,010 x3
2,73 0,107
25,40 1,000
2,73 0,107
4,57 0,145
8,89 0,350
10,89 0,429
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating see chart
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1 mm
Solder temperature
235°C at 3~5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 VDC/VAC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 VDC/VAC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: SIDE SHIELD PINS IN FRONT (4,57 mm)
NOTE 2: ONE REAR GROUNDING PINS CENTERED
NOTE 3: PANEL GROUND FLAGNES BOTH SIDES AND TOP (GF5)
1:1
NOTE 4: RoHS COMPLIANT
PART NO.
IDENT.-NR.
TRANSMISSION REQUIREMENT
ÜBERTRAGUNGSANFORDERUNG
CONTACT FINISH, MATING ZONE
OBERFLÄCHENBEHANDLUNG
203492
CATEGORY 5
1,27 µm [30 µin] Au OVER Ni
133671
Information:
CATEGORY 5
Tolerances
0,8 µm [30 µin] Au OVER Ni
Scale
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
Subject to modification without
To insure that this is the latest prior notice.
version of this drawing, please Drawing will not be updated.
contact one of the ERNI companies
before using.
A
19.06.2007
www.ERNI.com
Index
Date
Class
MOD JACK - MJR
8P8C, 1X2
203493
MJ
I (1/1)
A3