203491 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJLS

1,27 0,050
15,74 0,620
1
8
11,43±0,25 0,450 ±0,010
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,24 min.
TOP OF PCB
LP
18,67 0,735
+0,25
+0,010
2,50 0,00 0,098 0,000
2,97 0,117
8,13 0,320
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
7 x 1,27 = (8,809,350 )
0,76 0,030
1
8
3,30 ±0,25 0,130 ±0,010 x2
1,60 ±0,25 0,063 ±0,010 x2
11,43 0,450
15,54 0,612
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PA46 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7 ax. m20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5i,n.91a.000m
Contact finish termination zone Thickness of plating 80 µinattme Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standarddescription C2680(acc.JIS)
couplingdevice IEC512-8, 15f
50N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,5m2 m
Packaging
See chart
b) Contact -shell
IEC807-3
min 1,0 m
Solder temperature
260°Cat 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
reflow
a) Contact - contact
IEC 512-2, 4ain. 1m.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a in.m1.500 V AC/DC
Approvals
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
ULinsulationbody
UL94
V0
Contact resistance
IEC512-2, 2a max. 30 mOhm
ULFile No.
E145613
Insulationresistance IEC512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: WITH PEGS, SIDE GURNODING PINS AND SMT TERMINALS
NOTE 2: RoHS COMPLIANT
PART NO.
IDENT. NR.
PACKAGING
VERPACKUNG
133602
TRAY (Standard) (SEE PAGE 2 of 2)
203490
TAPE & REEL (SEE PAGE 2 of 2)
120 PIECES PER REEL
Information:
MAXCONN No.: SEE CHART
Tolerances
Scale
2:1
All Dimensions
in mm[in]
All rights reserved.
Designation
Only for Information.
Subject to modification without
To ensure that this is the latest prior notice.
MOD JACK - MJLS
version of this drawing, please Drawing will not be updated.
contact one of the ERNI companies
8P8C, 1X1, SMT, CAT 3/4
before using.
www.ERNI.com
203491
Class
MJ
I (1/2)
A3