203489 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - RJ45

12,70 0,500
1
.
8
10,28 0,405
0,97 0,038
8
1
16,26 0,640 MAX
SEE NOTE 1
6,65 0,262
5,28 0,208
2,54 0,100
3,43 0,135
4,32 0,170
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description High Temp. Thermoplastic Me c han i c al p ro p e rti e s
Contact material
Standard description Phosphor Bronze
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 50 µin Au over 50 µin Ni
Mechanical operations
IEC 512-5, 9a
> 500
Contact finish termination zone Thickness of plating 150 µin matte Sn over 50 µin Ni Effectiveness of connector
Shell/shield material
Standard description CuZn
coupling device IEC 512-8, 15f
88 N
Shell/shield plating
Thickness of plating 50 µ Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
1,02 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
4,06 mm
Solder temperature
265°C
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
Reflow
a) Contact - contact
IEC 512-2, 4a min. 900 V AC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC
Ap p ro v al s
Current carrying capacity IEC 512-3, 5b
0,2 A @ 70° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 50 mOhm
UL File No.
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
-40 to +85° C
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
TOP OF PCB
LP
17,18 0,676
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
0,89 0,035
1,60 0,063
10,67 0,420
2,03 0,080
1,02 0,040
3,25 0,128
8
2
7
1
2,79 0,110
1,78 0,070
12,70 0,500
NOTE 1: PLUG SELECIVE CAPABILITY: THE SPRINGS PERVENT FROM
INSERTION OF A RJ11 PLUG INTO THE JACK. COMPATIBLE
WITH RJ45 PLUGS.
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP
1:1
NOTE 3: RoHS COMPLIANT
Information:
Plug selective capability
Tolerances
Scale
2:1
±0,127
All Dimensions
in mm [in]
Designation
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
C
07.09.2009
Subject to modification without
prior notice.
Drawing will not be updated.
www.ERNI.com
MOD JACK - RJ45
8P8C, 1x1, CATEGORY 5
203489
I (1/1)
A3
Index
Date
Class
MJ