203476 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJIM

RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16,66 0,656
PCB EDGE
LP
15,88 0,625
L.E.D. 2
1
8
L.E.D. 1
11,43 ±0,130 0,450 ±0,005
PART NO.
IDENT-NR.
DATE CODE
DATUMSCODE
XXXXXX
XXXX RC
10,89 0,429
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5)
NOTE 3: RoHS COMPLIANT; PRINT "RC" WITH DATE CODE
NO.
IDENT. NR.
LED 2 LEFT
LED 2 LINKS
LED 1 RIGHT
LED 1 RECHTS
LED
CODE
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin), OVER Ni
TERMINAL FINISH: Sn MATTE
LED LENS: EPOXY
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE: 30 MILLIOHMS MAX
OPERATING TEMPERATURE: -40°C TO +85°C
203475
YELLOW
GREEN
L1
Information:
SCHEMATIC NUMBER: H5B02
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
-
Index
17.11.2006
Date
Tolerances
Scale
2:1
All Dimensions
in mm [in]
Designation
Subject to modification without
prior notice.
MOD JACK - MJIM
Drawing will not be updated. _{8C10T, 1x1, INT. MAG., LED ALIGNED}
www.ERNI.com
203476
I (1/2)
A3
Class
MJIM