203446 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

15,90 0,626 0,25
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 0,656
PCB EDGE
LP
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
UNLESS NOTED
3,12,6000,_±^9±00_{,02,52±50,0}²⁰⁵_{,1,02066,03±}³_0±⁵_{,00,±100010,01X}⁰_X22X8
1,27 ±0,25 0,050 ±0,010
0,635 ±0,10 0,025 ±0,004
2,54 ±0,25 0,100 ±0,010
8
1
1
8
11,43±0,25 0,450 ±0,010
2,54 0,100 0,2
1,00 0,039
8,90 0,350
3,05 0,120 0,25
2,86 0,113
10,89 0,429
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PA46
Mechanical properties
.
Contact material
Standard description CuSn5
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating Flash Au over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
11,43±0,25 0,450 ±0,010
15,49 ±0,25 0,610 ±0,010
1:1
NOTE 1: SIDE SHIELD TABS REAR OF PEG (3.05 mm)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5)
NOTE 3: RoHS COMPLIANT
PART NO.
IDENT. NR.
TRANSMISSION
REQUIREMENT
ÜBERTRAGUNGS-
ANFORDERUNG
133155 CAT 3/4
PCB HOLE
NUMBERING
LP BOHRUNGS-
NUMERIERUNG
2468
1357
Information:
Tolerances
Scale
2:1
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
A
Index
24.10.2007
Date
All Dimensions
in mm[in]
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJR
8P8C, 1X1
www.ERNI.com
Class
203446
MJ
I (1/1)
A3