203407 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJIM

135 7
2 468
135 7
2 468
31,12 1,225
13,97 0,550
1
8
1
8
LED 2
LED 1
25,40 ±0,13 1,000 ±0,005
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
TERMINAL FINISH: Sn MATTE
LED LENS: EPOXY
OPERATING TEMPERATURE: -40°C TO +85°C
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
32,22 ±0,20 1,269 ±0,008
TOP OF PCB
LP
10,89 0,429
NOTE 1: ONE REAR SHIELD TAB CENTERED
NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R)
NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
NO.
IDENT. NR.
LED 2 LEFT
LED 2 LINKS
LED 1 RIGHT
LED 1 RECHTS
LED
CODE
203407
GREEN
GREEN
L3
Information:
SCHEMATIC NUMBER: H3D01
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
b
Index
28.06.2012
Date
Tolerances
Scale
2:1
±0,2 mm (±0,008 inch)
if not specified
All Dimensions
in mm _[in]
Designation
Subject to modification without
prior notice.
MOD JACK - MJIM
Drawing will not be updated. _{8C10T,1x2,INT.MAG.,LED ALIGNED}
www.ERNI.com
203407
I (1/2)
A3
Class
MJIM