203396 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD-JACK-MJIM

59,09 2,33
3 x 13.97 [.550] = (41,91 1,65 )
13,97 0,55
1
8
1
8
1
8
1
8
LED 2
LED 1
53,34 ±0,13 2,10 ±0,01
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
TERMINAL FINISH: Sn matte
LED LENS: EPOXY
OPERATING TEMPERATURE: 0°C TO 70°C
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
32,22 ±0,20 1,27 ±0,01
TOP OF PCB
LP
10,89 0,43
Note 1: Modular Jack with 1000Base-T magnetics, compliant to IEEE 802.3ab
standards; optimized for use with voltage driven Gigabit PHY (i.e. VITESSE)
Note 2: Compatible to lead-free wave soldering process
Note 3: Rear shield tabs between each port (T)
Note 4: Side ground tab rear of peg 3,05 mm (R)
Note 5: Panel ground flanges both sides, bottom and top (GF5)
Note 6: RoHS comliant; print "RC" with date code
NO.
IDENT. NR.
LED 2 LEFT
LED 2 LINKS
LED 1 RIGHT
LED
LED 1 RECHTS
CODE
Information:
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
a
Index
01.09.2010
Date
203396
GREEN
GREEN
L3
Tolerances
Scale
2:1
±0,2 mm (±0,008 inch)
if not specified
All Dimensions
in mm
Designation
Subject to modification without
prior notice.
MOD-JACK-MJIM
Drawing will not be updated. _{8C10T,1x4,INT.MAG.,LED ALIGNED}
www.ERNI.com
203396
I (1/2)
A3
Class
MJIM