203385 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD-JACK-MJIM

15,88 0,63
L.E.D. 2
1
8
L.E.D. 1
11,43 ±0,13 0,45 ±0,01
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
TERMINAL FINISH: Sn matte
LED LENS: EPOXY
OPERATING TEMPERATURE: 0°C TO 70°C
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16,66 0,66
PCB EDGE
LP
10,89 0,43
Note 1: Modular Jack with 1000Base-T magnetics, compliant to IEEE 802.3ab
standards; optimized for use with voltage driven Gigabit PHY (i.e. VITESSE)
Note 2: RoHs compliant
Note 3: Compatible to lead-free wave soldering process
Note 4: Side ground tab rear of PEG 3.05 mm (R)
Note 5: Panel ground flanges both sides, bottom and top (GF5)
NO.
IDENT. NR.
203386
LED 2 LEFT
LED 2 LINKS
GREEN
LED 1 RIGHT
LED
LED 1 RECHTS
CODE
YELLOW
L2
203374
GREEN
GREEN
L3
203527
Orange/Green
Orange/Green
L9
Information:
Tolerances
Scale
2:1
SCHEMATIC NUMBER: M5E03
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
c
Index
28.06.2013
Date
±0,2 mm (±0,008 inch)
if not specified
All Dimensions
in mm
Designation
Subject to modification without
prior notice.
MOD-JACK-MJIM
Drawing will not be updated. _{8C10T,1x1,INT.MAG.,LED ALIGNED}
www.ERNI.com
203385
I (1/2)
A3
Class
MJIM