203338 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJIM

15.88 [.625]
#7 TERMINAL REMOVED
ANSCHLUSS ABGESCHNITTEN
1
8
11.43±0.13 [.450±.005]
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE)
TOL ±0.05 [.002] UNLESS NOTED
1.27 [.050]
0.64 [.025]
2.54 [.100]
8
ø0.89±0.07 [ ø.035±.003] X8
1
ø1.60±0.07 [ ø.063±.003] X2
ø3.25±0.07 [ ø.128±.003] X2
10.89 [.429]
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16.66 [.656]
PCB EDGE
LP
11.43 [.450]
15.49 [.610]
MAGNETICS SPECIFICATIONS @ 25˚C
AUTO MDIX COMPATIBLE
TURNS RATIO:
(P1-P2 : J1-J2)
1CT : 1 ±3%
(P3-P6 : J3-J6)
1CT : 1 ±3%
OCL (100KHz, 0.1Vrms, 8mA)
(P1-P2 : P3-P6)
350µH MIN
DCR (P1-P2, P3-P6)
1.1 OHMS MAX
INSERTION LOSS:
0.1 MHz - 100 MHz
-1.1 dB MAX
RETURN LOSS:
0.5 MHz - 30 MHz
-18 dB MIN
40 MHz
-15.5 dB MIN
50 MHz
-13.6 dB MIN
60 MHz - 80 MHz
-12 dB MIN
CROSSTALK (0.1 MHz - 100 MH-z4):0 dB TYP
COMMON MODE REJECTION
0.1 MHz - 30 MHz:
-50 dB TYP
30 MHz - 60 MHz:
-40 dB TYP
60 MHz - 100 MHz:
-35 dB TYP
ISOLATION:
1500 Vrms
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
TERMINAL FINISH: SnPb
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
OPERATING TEMPERATURE: -40˚C TO 85˚C
PCB
P1
CT P4
P2
P3
CT P5
P6
ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01
EXTENDED TEMPERATURE RANGE
ELEKTRISCHES DIAGRAMM
CABLE
J1
J2
J3
J6
J4,5
GND P8
J7,8
1000pF/2KV
4X 75 W
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
Information:
Tolerances
Scale
All Dimensions
in mm
2:1
Class. No.
-
-
-
All rights reserved.
Only for information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
b
Index
02JUL04
Date
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJIM
8C7T, 1X1, INTEGRATED MAGNETICS
www.ERNI.com
203338
I
MAXMJ