203328 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD-JACK-MJIM

15,88 0,63
L.E.D. 2
1
8
L.E.D. 1
11,43 ±0,13 0,45 ±0,01
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
TERMINAL FINISH: Sn matte
LED LENS: EPOXY
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE: 30 MILLIOHMS MAX
OPERATING TEMPERATURE: -40°C TO +85°C
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16,66 0,66
PCB EDGE
LP
10,89 0,43
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
NO.
IDENT. NR.
203329
LED 2 LEFT
LED 2 LINK
YELLOW
LED 1 RIGHT
LED
LED 1 RECHTE
CODE
GREEN
L1
203330
GREEN
YELLOW
L2
203331
GREEN
GREEN
L3
203332
GREEN
RED
L4
Information:
SCHEMATIC Number; T3DO1
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
a
Index
01.09.2010
Date
203333
ORANGE/GREEN
ORANGE/GREEN
L9
Tolerances
Scale
1:1
±0,2 mm (±0,008 inch)
if not specified
All Dimensions
in mm
Designation
Subject to modification without
prior notice.
MOD-JACK-MJIM
Drawing will not be updated. _{8C8T,1x1,INT.MAG.,LED ALIGNED}
www.ERNI.com
203328
I (1/2)
A3
Class
MJIM