203317 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJIM

RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16,66 0,656
PCB EDGE
LP
15,88 0,625
L.E.D. 2
1
8
L.E.D. 1
11,43 ±0,13 0,450 ±0,005
10,89 0,429
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5)
NOTE 3: PIN 7 PAD TO BE UNDERSIZED TO MEET ISOLATION REQUIREMENT
NOTE 4: RoHS COMPLIANT; PRINT "RC" WITH DATE CODE
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin), OVER Ni
TERMINAL FINISH: Sn MATTE
LED LENS: EPOXY
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
ELECTRICAL CHARACTERISTICS
OPERATING TEMPERATURE: 0°C TO 55°C
PART NO.
IDENT. NR.
203318
LED 2 LEFT
LED 2 LINK
YELLOW
LED 1 RIGHT
LED 1 RECHTE
GREEN
LED
CODE
L1
203319
GREEN
YELLOW
L2
203320
GREEN
GREEN
L3
203321
GREEN
RED
L4
203322
ORANGE/GREEN
ORANGE/GREEN
L9
Information:
SCHEMATIC NUMBER: M6A01
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
D
Index
11.01.2008
Date
Tolerances
Scale
2:1
All Dimensions
in mm [in]
Designation
Subject to modification without
prior notice.
MOD JACK - MJIM
Drawing will not be updated. _{8C10T, 1x1, INT. MAG., LED ALIGNED}
www.ERNI.com
203317
I (1/2)
A3
Class
MJIM